The MultiPlus-II 48/5000 70-95 120V is a combined 48V inverter and battery charger for off-grid and grid-connected solar systems. It delivers 5000VA and pairs a 120V AC output with PowerControl and PowerAssist, which cap the draw on a weak grid or generator and top up shortfalls from the battery. An external current sensor option extends PowerControl and PowerAssist to 100A. Two AC outputs include a no-break main output that switches over in under 20 milliseconds, so computers and electronics keep running through an outage. It suits off-grid cabins, backup power and hybrid solar installs; against simpler inverter/chargers it adds generator support and fast transfer, but it is a heavy, high-current 48V unit that needs proper wiring and configuration.
In stockSold by Jonsson TechReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
Owners of the MultiPlus-II line praise the seamless transfer and generator-assist behavior in off-grid and backup setups. Installers note it needs careful configuration and substantial 48V wiring.
The MultiPlus-II 48/5000 70-95 120V is a combined inverter and charger for off-grid and grid-connected PV and other alternative energy systems. It works with solar charge controllers and grid-tie inverters. It has two AC outputs.
PowerControl sets a maximum grid or generator current and sends any surplus AC power to battery charging, so the grid or generator is not overloaded. PowerAssist adds battery power when a load needs more than the generator, shore or grid can supply, and the spare power is used to recharge the battery when the load drops. An external current sensor option extends PowerControl and PowerAssist to 100 A.
The main AC output has no-break functionality: it takes over the supply to connected loads in under 20 milliseconds when the grid fails or shore or generator power is disconnected, so computers and other equipment keep running. The second output is live only when AC is available at the input, for loads such as a water heater that should not discharge the battery. Up to 6 units can operate in parallel, two units of the same model can be connected for 240 V split phase output, and three can be configured for three-phase output, with up to 6 sets of three units parallel connected per phase.
It checks today's price at every store, compares the alternatives and answers in about a minute.