
Vincent Audio SV-200 Hybrid Stereo Integrated Amplifier
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Vincent SV-200 is a hybrid stereo integrated amplifier: two 6N1 tubes handle the input stage and a solid-state output stage delivers 25 watts per channel into 8 ohms, or 35 watts into 4 ohms. It is a half-width, 95mm-tall, 11-pound box, so it fits shelves and small rooms where full-size separates will not. Vincent positions it as a smaller, lighter take on its SV-237 and SV-700, keeping the tube warmth and low noise at lower power. It suits near-field and efficient-speaker setups more than power-hungry floorstanders.
In stockReturn policy
The Vincent Audio SV-200 is a hybrid stereo integrated amplifier. The preamplifier and power amplifier are housed in one case about half the width of a normal component. Two 6N1 tubes shape the signal in the small-signal stage, while a solid-state output stage drives the speakers.
An oversize toroidal transformer feeds the output stage. The amplifier delivers 25 watts per channel into 8 ohms and 35 watts per channel into 4 ohms. Distortion stays under 0.1% at 1 kHz, signal-to-noise is better than 72 dB, and frequency response runs from 20 Hz to 20 kHz within half a decibel. Input impedance is 47 kilohms.
A built-in converter adds optical and coaxial digital inputs, so a TV or CD transport can connect directly. Two stereo RCA inputs accept line-level sources, and there is no phono input; a turntable requires a phono preamp. Outputs include a preamp output, a record output, and two pairs of speaker terminals. Two 3.5 mm control jacks let the amplifier switch on and off with a system, and a remote is included.