This is a 12-port surge protector power strip with 8 AC outlets, 2 USB-C ports and 2 USB-A ports. The outlets are arranged on four sides of a compact tower, so plugs and USB cables don't block each other. Outlets are spaced 1.65 inches apart to fit large plugs and power bricks.
It has a 10 ft braided cord with an ultra-thin flat plug that is 0.3 inches thick. The plug sits flush against the wall so furniture can sit close to it. Its 45° right-angle design leaves room for other receptacles below. Two mounting holes on the back allow wall, desk or counter installation.
An 8-point safety system includes 1050 joules of surge protection, 1250W overload protection and 10A over-current protection. The casing is V-0 fire-retardant, and the cable is UL-recognized. The USB ports detect each connected device's power draw and set the charging speed. The strip accepts 100-240V input, but it is not a voltage converter. Devices must support 100-240V, or you need a converter for 110V or 125V-only devices.
- Ports
- 12 total: 8 AC outlets, 2 USB-C, 2 USB-A
- USB-A output
- 5V/2.4A each
- USB-C output
- 5V/3A each
- Total USB output
- Up to 15W
- Outlet spacing
- 1.65 inches
- Cord length
- 10 ft, braided
- Plug
- Type B, 3-pin North American, flat, 0.3 inches thick, 45° right angle
- Surge protection
- 1050 joules
- Overload protection
- 1250W
- Current
- 10A maximum, 10A over-current protection
- Voltage
- 125V rating; 100-240V input compatible
- Fire resistance
- 1382℉ fire retarding, V-0 fire-retardant casing
- Cable
- UL-recognized
- Material
- Polycarbonate, polyvinyl chloride
- Dimensions
- 4.5"L x 3.7"W
- Color
- White
- Mounting
- 2 mounting holes on the back
- Controls
- On/off switch
- Smart home
- Not smart home compatible