The VSW124v3 is a 12-inch dual 4-ohm subwoofer from the VS Series. It handles 600 watts RMS and 1200 watts peak, with a 13.5 mm Xmax.
The cone is made of enhanced pressed paper with a high-roll foam surround and black nylon stitching. The basket is vented stamped steel with a punched NVX logo. The motor uses a 2.5-inch high-temperature copper voice coil on an aluminum former, a progressive roll single-layer spider with integrated tinsel leads, and an optimized high-velocity pole vent. A 107 oz. double-stacked ferrite magnet has a protective rubber boot.
It can be installed in a sealed or ported enclosure. It is CTA-2031 compliant.
- Size
- 12 inches
- Impedance
- Dual 4-ohm
- Peak power
- 1200 watts
- RMS power
- 600 watts
- Xmax
- 13.5 mm
- Cone
- Enhanced pressed paper
- Surround
- High-roll foam with black nylon stitching
- Basket
- Stamped steel, vented, with punched NVX logo
- Voice coil
- 2.5" high-temperature copper with aluminum former
- Spider
- Progressive roll single-layer with integrated tinsel leads
- Pole vent
- Optimized high-velocity
- Magnet
- 107 oz. double-stacked ferrite with protective rubber boot
- Frequency response
- 20 - 200 Hz