
W10 K6 Series 10" Subwoofers 2-Pack + dB14 Amplifier Bundle
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Lowest price today: $364.85 at Rockville (checked Nov 21, 2026).
Our take on the W10 K6 Series 10" Subwoofers 2-Pack + dB14 Amplifier Bundle
This bundle pairs two Rockville W10K6D2 V2 10-inch dual 2-ohm subwoofers with a Rockville dB14 mono amplifier and a 4-gauge wiring kit. The subs are rated at 4,000 watts peak and the dB14 at 4,000 watts peak with 1,000 watts dyno-certified RMS at 2 ohms, so the amp is sized to drive the pair wired to a 2-ohm load. It suits someone building a loud daily bass setup on a budget who wants subs, amp and wire in one box. Against premium brands, Rockville trades refinement and long-term durability for output per dollar; owners of this line generally report strong output for the money but mixed feelings on build finish and rated power claims.
- Two 10-inch dual 2-ohm subs plus a matching mono amp and 4-gauge kit
- Amp is dyno-certified at 1,000 watts RMS at 2 ohms
- Dual 2-ohm voice coils allow a 2-ohm or 0.5-ohm final load
- CEA-compliant subwoofer ratings
- Wiring kit includes RCA cables for a complete install
- Peak power figures are far above real RMS ratings
- Rockville amps and subs have a mixed reputation for durability
- No enclosure included, so box cost and build are extra
- Cheap wiring kit components are a common weak point
- Bass-heavy tuning suits rap and EDM more than critical listening
W10 K6 Series 10" Subwoofers 2-Pack + dB14 Amplifier Bundle prices at every store
- RockvilleNew
In stockReturn policy
$364.85Checked 5 h ago
What reviewers say
Owners of Rockville K6 subs and dB-series amps describe loud output for the money, with the dB14 doing real work at 2 ohms. Complaints center on overstated peak ratings, amp reliability and thin included wiring.
- OutputPraisedOwners say the pair gets loud and hits hard in a proper box.
- Power ratingsCriticisedBuyers say the 4,000-watt peak figures overstate what the gear delivers continuously.
- Amplifier reliabilityMixedSome report the dB14 running strong, others report protect mode or failure.
- Wiring kitCriticisedThe included 4-gauge wire and RCAs are described as basic and worth upgrading.
- ValuePraisedReviewers say the bundle covers subs, amp and wire for less than buying separately.
About the W10 K6 Series 10" Subwoofers 2-Pack + dB14 Amplifier Bundle
This bundle pairs two Rockville W10K6D2 V2 10-inch car subwoofers with a Rockville dB14 mono amplifier and a Rockville RWK41 4-gauge amplifier wiring kit with RCA cables. Each subwoofer uses dual 2-ohm voice coils and handles 2000 watts peak, 1000 watts program and 500 watts CEA-rated RMS. The amplifier is rated at 4000 watts peak and 1000 watts dyno-certified RMS into 2 ohms.
Each subwoofer is built on a cast aluminum basket with a black sanded finish and a double stacked 100 oz magnet. The cone is fiber-reinforced, non-pressed paper with red stitching and a thick foam surround, and the dustcap is polypropylene. The 2.5-inch voice coils are wound on black aluminum formers with 100% OFC copper wire, and a vented hole on the T-yoke helps dissipate heat.
Two chrome-plated binding post terminals accept any gauge of wire, and a custom mounting gasket helps seal the subwoofer to the enclosure. The cutout diameter is 9.41 inches and the mounting depth is 5.29 inches. Recommended enclosure volumes are 0.6 to 1.1 cubic feet sealed, or 1.1 to 1.6 cubic feet vented or ported.
- In the box
- 2 x W10K6D2 V2 10" subwoofers, dB14 mono amplifier, RWK41 4-gauge wiring kit with RCA cables
- Subwoofer size
- 10 in
- Impedance
- Dual 2-ohm voice coils
- Peak power
- 2000 watts per subwoofer
- Program power
- 1000 watts
- RMS power
- 500 watts, CEA rated
- Amplifier power
- 4000 watts peak, 1000 watts dyno-certified RMS
- Amplifier configuration
- Mono, 2 ohm
- Voice coils
- 2.5 in, black aluminum former with 100% OFC copper wire
- Magnet
- Double stacked, 100 oz
- Basket
- Cast aluminum, black sanded finish
- Cone
- Fiber-reinforced non-pressed paper with red stitching
- Surround
- Thick foam
- Dustcap
- Polypropylene
- Terminals
- 2 chrome-plated binding posts
- Cutout diameter
- 9.41 in
- Mounting depth
- 5.29 in
- Frequency response
- 36.7 Hz - 1.5 kHz
- Sensitivity
- 85 dB
- Sealed enclosure volume
- 0.6 - 1.1 cu ft
- Vented enclosure volume
- 1.1 - 1.6 cu ft
- T-yoke and washer
- 8mm T-yoke, 8mm washer
- Weight
- 16.53 lbs per subwoofer
- Wiring kit
- 4 gauge
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Questions and answers
- What final impedance do these subs wire to?
- Each sub has dual 2-ohm voice coils. Wiring each sub's coils in parallel gives 1 ohm per sub, and paralleling both subs gives a 0.5-ohm load; series-parallel wiring gives 2 ohms. The dB14 is rated at 2 ohms, so wire for a 2-ohm final load.
- Does the dB14 amp match these subs?
- Yes, at a 2-ohm final load. The dB14 is rated 1,000 watts RMS at 2 ohms, and the two subs together handle roughly that range, so the pairing is sensible for daily use.
- Is a subwoofer box included?
- No. The bundle has the two subs, the amp and the wiring kit only. You need to supply or build an enclosure sized to Rockville's specs for the W10K6D2.
- What is in the box?
- Two W10K6D2 V2 10-inch dual 2-ohm subwoofers, one dB14 mono amplifier, and one RWK41 4-gauge amp wiring kit with RCAs.
- Can one amp run both subs?
- Yes. The dB14 is a mono amp, so both subs wire together to a single 2-ohm load and connect to its single output.
- Is this bundle good for sound quality or just volume?
- It is built for output. If you want tight, accurate bass, premium subs and a higher-end amp will do better; this kit is aimed at loud daily bass on a budget.
- Where is the W10 K6 Series 10" Subwoofers 2-Pack + dB14 Amplifier Bundle cheapest?
- At Rockville, for $364.85, as of our latest check.