The WarmlyYours PowerMat is an electric snow and ice melting mat that is embedded under concrete, asphalt, or pavers. It heats driveways, sidewalks, walkways, porches, patios, and ramps to melt snow and ice without shoveling. Mats can be combined for full coverage or placed to clear tire tracks only.
It uses a twin-conductor heating cable built to withstand winter conditions and heavy driveway or walkway traffic. The system needs no pipes, boilers, tubing, tanks, or pumps. The mat is CSA certified (cCSAus Listed) and runs on 120 V, delivering 50 W per square foot.
The mat can be set to run automatically based on conditions such as air temperature or surface moisture. A compatible snow and ice control kit, such as SCP-120-AIR-SS-2, SCA-DUAL-AIR-SS-2, or SCE-120-SLAB-SS, automates snow melting. US NEC 426.28 requires ground fault protection of equipment (GFPE) for fixed outdoor electric snow melting equipment. Canadian installations should follow CSA C22.1, Rule 62-116. All installations must comply with local and national building and electrical codes.
- Model
- WHMA-120-0215
- Mat size
- 15 ft. long x 2 ft. wide
- Coverage
- 30 sq. ft.
- Voltage
- 120 V
- Current
- 12.5 A
- Power
- 1500 W
- Heat output
- 50 W per sq. ft.
- Cable spacing
- 3 in.
- Element thickness
- 0.3125 in.
- Cold lead
- 20 ft.
- Install depth
- 3 to 4 in.
- Installs under
- Concrete, asphalt, or pavers (in the mortar)
- Certification
- cCSAus Listed
- Warranty
- 10-year limited manufacturer's warranty
- Support
- Lifetime technical support from US and Canadian based experts
- Package size
- 25.0 x 6.6 x 6.5 in.
- Controls
- Premium, Economy, Timer, or Value controls available