The Watchdives EXD is a 40mm automatic dive watch with a Grade 2 titanium case. The case has clean brushed finishing and sharp lines. It is 11.6mm thick, with a flat sapphire crystal that has an enhanced anti-reflective coating and approximately 95% light transmission.
It uses the Peacock SL3001 high-beat automatic movement, which runs at 28,800 vph (4Hz) for a smoother seconds-hand sweep. The bezel is a 60-click bidirectional ceramic bezel with full BGW9 lume. The dial markers are 3D lume blocks about 0.5mm thick, made with Swiss Super-LumiNova, and give around 6 to 8 hours of visible glow after sufficient charging.
The crown and case back are screw-down, and the watch is water resistant to 200M / 20 bar. It comes on a hook-and-loop nylon strap with a titanium buckle. The Exchangeable Lugs Design (EXD) lets it fit multiple strap styles.
- Movement
- Peacock SL3001 high-beat automatic, 28,800 vph / 4Hz
- Case
- Grade 2 titanium
- Crystal
- Flat sapphire with ClearView+ AR coating, approx. 95% light transmission
- Bezel
- 60-click bidirectional ceramic, full BGW9 lume
- Lume
- BGW9, LumeCore Base, Swiss Super-LumiNova, approx. 6–8 hours of visible glow
- Crown
- Screw-down
- Case back
- Screw-down
- Water resistance
- 200M / 20 bar
- Diameter
- 40mm
- Lug-to-lug
- 48mm
- Thickness
- 11.6mm
- Lug width
- 20mm
- Strap
- Hook-and-loop nylon with titanium buckle
- Lugs
- Exchangeable Lugs Design (EXD), compatible with multiple strap styles
- Style
- Titanium automatic dive / tool watch
- Warranty
- 2 years