This is a digital machine embroidery design for a draught stopper and quilt blocks, stitched in the hoop. Each block is embroidered in the hoop and then joined with a sewing machine. The draught stopper has one house at each end. The design is raw edge applique with no satin stitch.
The letters included are W, E, L, C, O, H and M. Two different house designs are also included. In the 4x4 size, two example layouts are given. The 'Welcome' layout uses 9 blocks and suits a standard 32-inch door. The 'Home' layout uses 8 blocks and suits a smaller door. For a longer or shorter draught stopper, use a different combination of blocks. In the 5x7 size, 7 blocks should fit a standard door.
The blocks can also be used for quilts, table runners and hangers. Example alternative layouts for these are included in the instructions, along with full photo instructions and directions.
- Product type
- Digital machine embroidery design (in the hoop)
- Hoop sizes
- 4x4 and 5x7
- Technique
- Raw edge applique, no satin stitch
- Letters
- W, E, L, C, O, H, M
- Designs
- 2 house designs
- 4x4 'Home' layout
- 8 blocks; finished size 10 cm x 76 cm (4" x 30")
- 4x4 'Welcome' layout
- 9 blocks; finished size 10 cm x 84 cm (4" x 33"); fits a standard 32-inch door
- 5x7 layout
- 7 blocks; finished size 18 cm x 81 cm (7.5" x 32")
- File formats
- pes, hus, sew, xxx, jef, vp3, vip, mit, dat, dst, exp and others; all formats included (no ART; Bernina machines can use EXP)
- Instructions
- Full photo instructions in English and German
- Other uses
- Quilts, table runners, hangers