Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The WEN 20691 is a cordless plunge-cut track saw that runs on two 20V Max batteries and a brushless motor with variable speed from 2,000 to 5,500 RPM. It cuts up to 2.25 inches deep at 90 degrees and 1.65 inches at 45 degrees, enough for 2x4s and 2x6s, and it rides on WEN's CT9502 and CT9110 tracks. It suits woodworkers and remodelers who want table-saw straight cuts on plywood and doors without dragging a cord or a heavy saw. Against premium track saws it gives up some fit and finish and track refinement, but it brings dual batteries, a 48-tooth blade and a dust port at a fraction of the outlay.
In stockReturn policy
Owners treat it as a capable value track saw for sheet goods and door trimming, with the dual-battery setup and included blade drawing the most praise. Complaints center on the saw's weight, the extra cost of the track, and cuts that need a check against a straightedge.
The WEN 20V Max cordless track saw is a 6.5-inch plunge cut saw with a brushless motor. It runs on two 20V max batteries and has variable speed from 2000 to 5500 RPM. It can rip boards up to 2.25 inches thick, or make 45-degree bevel cuts in boards up to 1.65 inches thick.
The 12 x 6.75-inch base has precision grooves that let the saw glide along a track. The track is not included. The saw works with the WEN CT9502 and CT9110 tracks and the CT992F track saw clamps. It can also be used on its own as a plunge saw, using its flat base for stability.
The saw has three blade settings: scoring cuts 1/8 inch deep, full plunge cuts, and a setting that simplifies blade changes. The bevel adjusts from -1 to 47 degrees, and the depth gauge sets plunge depth from 0 to 2.1 inches. A back-mounted dust port connects to a dust collection system. The included dust port adapter lets the saw stay flush against walls.
