This nanny camera is built into a housing that looks like a multi-band wireless internet router. The router is a shell and does not function. Its ports are non-working, and plugging in an internet cable will not draw power or change any settings. Inside is a high definition, motion-activated camera with a built-in pinhole lens and a wide field of view.
Live view streams in 4K through the free allcam365 app for Android and iPhone. Recordings are 1080p and are saved to the 32GB of built-in memory. They can be viewed in the app and downloaded to a smart device. Recording can be set to motion activation or continuous, and the app also provides motion alerts and remote playback.
To set it up, connect the supplied power adapter and turn it on. The camera creates a short-range Wi-Fi signal. Connect to it from the app and add the camera with the plus button. It first connects in AP mode, which allows live view, setup and access to recordings without internet. For online mode, choose wifi configuration and pair the camera with a 2.4GHz network. Once the app shows "Online," the camera can be viewed remotely and sends motion notifications.
- Storage
- 32GB built-in memory, pre-installed
- Resolution
- Live view in 4K; recorded footage in 1080p
- Lens
- Built-in pinhole lens with wide field of view
- Recording
- Motion-activated or continuous
- Alerts
- Motion alerts and remote playback in the app
- App
- Free allcam365 app for Android and Apple devices
- Wi-Fi
- 2.4GHz networks
- Modes
- Online mode (remote access) and offline, storage-only mode (AP mode)
- Ports
- Non-functioning, for appearance only
- Power
- Supplied power adapter