Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is 10 AWG, two-conductor solid copper NM-B cable with a ground wire, sold as a 250-foot coil. It is rated 30 amps at 600 volts with 90°C PVC insulation and an orange outer jacket for quick identification. It suits dry, protected indoor runs inside walls, ceilings and floors, such as dedicated 30-amp circuits for dryers, ranges and air conditioners. Against 12/2 and 14/2 NM-B, it carries more current but is stiffer and harder to pull, and it cannot be used in wet or exposed locations.
In stockReturn policy
This is a 10 AWG, 2-conductor NM-B non-metallic sheathed cable with ground. It has solid copper conductors and comes in a 250-foot coil. It is rated for 30 amps at 600 volts, with a 90 degrees C temperature rating.
The conductors are insulated with PVC and enclosed in an orange PVC outer jacket. It is made for branch circuit wiring in residential construction and light commercial applications, including 30-amp dedicated circuits for dryers, ranges, air conditioners and similar loads.
NM-B cable suits dry, damp or protected indoor locations within finished walls, ceilings and floors. It must not be installed in conduit, exposed in wet locations, or used in place of cable types required in commercial or industrial occupancies. Installation should be done by a licensed electrician in accordance with the NEC and local codes, with the circuit de-energized and locked out.
