This set has 7 carving tools for relief carving, chip carving and hollowing spoons, cups and bowls. It includes a flat chisel, straight and bent gouges, a V-parting tool and a chip carving knife.
The blades are hand-forged from W1-7 high-carbon steel. They are tempered in an 11-stage cycle to 60-62 HRC and are 2 mm thick. The blades are 100 mm (4") long. The 2 mm thickness reduces the wedge effect when cutting.
The handles are solid European oak finished with natural linseed oil. Each has an 18 mm copper ring. The short and long bent gouges reach into concave surfaces and level backgrounds where a straight shank would hit the rim.
- Pieces
- 7
- Steel
- Hand-forged W1-7 high-carbon steel
- Hardness
- 60-62 HRC, 11-stage tempering
- Blade thickness
- 2 mm
- Blade length
- 100 mm (4")
- Handle
- Solid European oak, natural linseed oil finish
- Ferrule
- Copper ring, 18 mm
- Origin
- Made in Ukraine
- Flat chisel
- Flat-beveled chisel, 24 mm (Art. 160024)
- Gouges
- Sweep #5, 25 mm (Art. 100525); Sweep #8, 20 mm (Art. 100820)
- Bent tools
- Long bent chisel, sweep #7, 20 mm (Art. 110720); short bent gouge, sweep #9, 20 mm (Art. 119920)
- V-parting tool
- 60°, 5 mm (Art. 104505)
- Chip carving knife
- 45°, 35 mm (Art. 184535)