Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The WOODBRIDGE MBTDC6062-B5 is a frameless sliding bathtub door in 3/8-inch (10 mm) clear tempered glass with a brushed nickel finish. Its stainless steel top guide bar trims up to 4 inches, so it fits openings from 56 to 60 inches wide at 62 inches tall. Large stainless steel rollers and a pull handle give quiet, smooth sliding, and the reversible design lets the door open from either side. The thick glass and frameless look put it above thin framed kits, but the fixed panel and door leave a walk-in of about 21.5 to 25.5 inches, so check your tub and clearance before buying.
In stockReturn policy
This frameless sliding bathtub door is made of 3/8" (10 mm) clear tempered safety glass with a brushed nickel finish. The glass is ANSI Z97.1 certified and is easy to clean and resists water spots. A transparent safety film is bonded to the panels. If the glass breaks, the film holds the fragments and the broken panel in place for easier disposal.
The door slides on large solid stainless steel rollers for quiet, smooth movement, and it opens with a pull handle. The stainless steel top guide bar can be trimmed by up to 4 inches to adjust the width. The hardware is stainless steel, and an anti-splash threshold helps keep water from spilling out. The door is reversible, so it can be installed to suit the bathroom layout.
The door does not adjust for out-of-plumb walls. Walls must be at right angles and plumb to avoid gaps that can cause leaks. Take all measurements after the walls are finished, including tile and back walls. The anti-splash threshold needs a minimum threshold depth of 2 3/4 in. The door can be used with or without a shower base.
