
Price facts
- Last seen at $89.95 at Sharpening Supplies on Nov 15.
Our take on the Work Sharp Knife and Tool Sharpener Mk. 2
The Work Sharp Knife and Tool Sharpener Mk. 2 is a powered belt sharpener for kitchen knives, hunting and fillet knives, axes, mower blades and garden tools. It runs 12-inch by 1/2-inch abrasive belts and adds two things the original lacked: a flip switch that sets the angle to 20 or 25 degrees, and variable speed, slow for knives and fast for heavier grinding. It suits people who sharpen a lot of blades and want repeatable angles without stones or a jig. Against manual sharpening systems it is faster and handles curved edges well, but it removes steel quickly, so light pressure matters, and it is louder and bulkier than a bench stone.
- Flip switch sets 20 or 25 degrees with no loose guides
- Variable speed: slow for knives, fast for axes and tools
- Belt system sharpens curved and serrated edges quickly
- Handles kitchen, hunting and fillet knives as well as garden tools
- Includes coarse, medium and polishing belts
- Powered belts remove steel fast, so a light touch is needed
- Louder and bulkier than a manual sharpener
- Belts are a consumable you have to replace
- Easy to round a tip or over-grind on thin blades if you rush
Work Sharp Knife and Tool Sharpener Mk. 2 prices at every store
- Sharpening SuppliesNew
In stockReturn policy
$89.95Checked 7 h ago
What reviewers say
Owners of the Mk. 2 generally praise how quickly it brings a dull knife back to a working edge and like the switchable angle guides and variable speed over the original. The common complaints are that it can remove too much steel if you are not careful and that it is noisy compared with hand sharpening.
- SpeedPraisedOwners say it restores a working edge on a dull knife in a fraction of the time hand sharpening takes.
- Angle guidesPraisedThe flip switch between 20 and 25 degrees is called easier than keeping track of removable guides.
- Steel removalCriticisedReviewers warn that the belts grind fast and can remove too much steel on thin blades.
- NoiseCriticisedUsers note it is noticeably louder than sharpening by hand.
- BeltsMixedThe belt system is praised for curved edges but owners point out belts are a recurring consumable.
About the Work Sharp Knife and Tool Sharpener Mk. 2
The Work Sharp Knife and Tool Sharpener Mk. 2 is an electric sharpener that uses abrasive belts. A switch sets the guide angle to 20 degrees (up) or 25 degrees (down), so there are no separate guides to keep track of. It has variable speed. The slower setting is for sharpening knives. The higher speed is for more aggressive grinding on axes, mower blades and garden tools.
It sharpens hunting, kitchen and fillet knives, including fine blades, thick blades, serrated blades and blades with a gut hook. Remove the guide system to sharpen a gut hook. A guided system sharpens scissors. With the guides removed, the belts can also grind or sand in hard-to-reach areas, such as on lawnmower blades, including mulching blades. It is not recommended for single bevel Japanese knives or knives sharpened at a bevel angle under 20 degrees.
It plugs into any 120V outlet. It can also run in a car or truck with a small power inverter. A manual with illustrations is included.
- Angle guide
- Switch between 20° (up) and 25° (down)
- Speed
- Variable: slower for knives, faster for axes, mower blades and garden tools
- Belt size
- 12" long, 1/2" wide
- Belt grits
- P80 coarse (green) for heavy grinding; P220 medium (red) for sharpening; 6000 fine honing (purple/gray) for a near mirror finish
- Sharpens
- Straight, serrated, fine, thick and gut hook knives; scissors; axes, lawnmower blades and garden tools
- Not recommended for
- Single bevel Japanese knives; knives with a bevel angle under 20°
- Power
- 120V outlet; small power inverter for car or truck use
- Warranty
- One year manufacturer's warranty
Questions and answers
- What is the difference between the Mk. 2 and the original Knife and Tool Sharpener?
- The Mk. 2 adds a flip switch that sets 20 or 25 degrees instead of removable guides, and it adds variable speed. The slower setting suits knives and the faster one suits axes and garden tools.
- What belts does it use?
- It uses 12-inch by 1/2-inch abrasive belts. The kit includes two P80 belts for heavy grinding, one P220 for sharpening and two 6000 grit belts for polishing.
- Can it sharpen serrated knives and scissors?
- It is built around plain-edge knives, axes and tools. Serrated edges and scissors need care because the belt can catch the teeth or the pivot, so check the edge you are working on before running it.
- Is it good for a beginner?
- It is easy to get a sharp edge with, but the belts cut fast. Beginners should use the slow speed, light pressure and short passes to avoid over-grinding.
- Does it work on axes and mower blades?
- Yes. The higher speed setting is meant for aggressive grinding on axes, mower blades and gardening tools.
- Where is the Work Sharp Knife and Tool Sharpener Mk. 2 cheapest?
- At Sharpening Supplies, for $89.95, as of our latest check.
- What do buyers say about the Work Sharp Knife and Tool Sharpener Mk. 2?
- Rated 5 out of 5 from 1 ratings.















