Is a 96% AFUE furnace worth it over an 80% model?

A 96% unit converts nearly all the gas it burns into heat, while an 80% furnace loses roughly a fifth up the flue. The gap shows up over years of heating, and the two-stage operation adds comfort on top of the efficiency.

What size home does 60,000 BTU suit?

With 57,600 BTU output and a blower rated for 1.5 to 3 tons of cooling, it fits smaller to mid-size homes and moderate climates. A load calculation decides the right size, not square footage alone.

Does it work with air conditioning?

Yes. The ECM blower moves about 1,200 CFM nominal and up to 1,323 CFM at 0.5 in. static pressure, enough for a matching coil and condenser in the 1.5 to 3 ton range.

Where can it be installed?

It is configured for downflow and horizontal installations, so it fits closets and attic or crawlspace layouts where air flows down or sideways. It is not set up for upflow.

What venting does it need?

As a condensing furnace it vents through 2 in. or 3 in. PVC pipe, and it needs a drain for condensate. That rules out reusing an old metal flue.

Where is the Wrangler WR-GD9T960603BN Gas Furnace cheapest?

At acunitsforless.com, for $1,957.00, as of our latest check.

What do buyers say about the Wrangler WR-GD9T960603BN Gas Furnace?

Rated 5 out of 5 from 3 ratings.

Wrangler WR-GD9T960603BN Gas Furnace

Best price now

$1,957.00at acunitsforless.comChecked 4 h ago

Prices are checked against each store and labelled with when.

Visit acunitsforless.com

Wrangler WR-GD9T960603BN Gas Furnace

Best price now

$1,957.00at acunitsforless.comChecked 4 h ago

Prices are checked against each store and labelled with when.

Visit acunitsforless.com

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Lowest price today: $1,957.00 at acunitsforless.com (checked Nov 14, 2026).

Our take on the Wrangler WR-GD9T960603BN Gas Furnace

The Wrangler WR-GD9T960603BN is a two-stage gas furnace rated at 96% AFUE, with 60,000 BTU input and 57,600 BTU output. It is built for downflow and horizontal installations and uses a multi-speed ECM blower with a two-stage gas valve, so it runs at low heat most of the time and steps up only when needed. That combination gives steadier temperatures and quieter low-fire operation than a single-stage furnace, and the 96% rating puts it in the condensing, high-efficiency class. It suits homeowners replacing an older 80% furnace in a downflow or horizontal setup who want lower fuel use and gentler cycling.

Best forHomeowners replacing an older 80% furnaceDownflow or horizontal closet and attic installationsHomes wanting steadier heat and quieter low-fire operationBuyers pairing a furnace with a matching cased coil

Pros

96% AFUE condensing efficiency
Two-stage gas valve for low and high heat output
Multi-speed ECM blower for smooth, consistent airflow
Downflow and horizontal configuration in one cabinet
Compact 17-1/2 in. wide cabinet

Cons

Condensing design needs a drain and condensate management
Two-inch to three-inch venting required, not standard single-wall flue
Low 7.8 amp minimum circuit keeps electrical simple but limits air handler add-ons
No cooling or heat pump built in; it is heating only

Wrangler WR-GD9T960603BN Gas Furnace prices at every store

acunitsforless.comNew
In stockReturn policy
$1,957.00Checked 4 h ago
Visit acunitsforless.com

Also available at

acunitsforlessCheck price at acunitsforless

Wrangler WR-GD9T960603BN Gas Furnace price history

Lowest price we've seen: $1,957.00 on Nov 14 at acunitsforless. Tracked across 1 store since Nov 14.

About the Wrangler WR-GD9T960603BN Gas Furnace

The Wrangler WR-GD9T960603BN is a two-stage gas furnace with a 96% AFUE rating. It has a 60,000 BTU input and a 57,600 BTU output. It can be installed in downflow or horizontal configurations.

The two-stage gas valve lets the furnace run at a low or a high heat output. Low output suits milder weather and high output suits colder weather. A multi-speed ECM blower provides smooth, consistent airflow.

The furnace runs on natural gas and can be converted to propane with the appropriate conversion kit.

Model: WR-GD9T960603BN
Type: Two-stage gas furnace
Stages: Two
AFUE: 96.0%
Configuration: Downflow/Horizontal
Input: 60,000 BTU/h
Output: 57,600 BTU/h
Nominal tons: 1.5 - 3
Nominal CFM: 1,200
CFM at 0.5" ESP: 1,323
Blower motor: Multi-speed ECM
Fuel: Natural gas (LP convertible with conversion kit)
Min. circuit amps: 7.8
Vent size: 2" - 3"

Specifications

Number Of Stages: Two
AFUE: 96.0%Source
Configuration: Downflow/HorizontalSource
BtuH Input: 60,000Source
BtuH Output: 57,600Source

Questions and answers

Is a 96% AFUE furnace worth it over an 80% model?: A 96% unit converts nearly all the gas it burns into heat, while an 80% furnace loses roughly a fifth up the flue. The gap shows up over years of heating, and the two-stage operation adds comfort on top of the efficiency.
What size home does 60,000 BTU suit?: With 57,600 BTU output and a blower rated for 1.5 to 3 tons of cooling, it fits smaller to mid-size homes and moderate climates. A load calculation decides the right size, not square footage alone.
Does it work with air conditioning?: Yes. The ECM blower moves about 1,200 CFM nominal and up to 1,323 CFM at 0.5 in. static pressure, enough for a matching coil and condenser in the 1.5 to 3 ton range.
Where can it be installed?: It is configured for downflow and horizontal installations, so it fits closets and attic or crawlspace layouts where air flows down or sideways. It is not set up for upflow.
What venting does it need?: As a condensing furnace it vents through 2 in. or 3 in. PVC pipe, and it needs a drain for condensate. That rules out reusing an old metal flue.
Where is the Wrangler WR-GD9T960603BN Gas Furnace cheapest?: At acunitsforless.com, for $1,957.00, as of our latest check.
What do buyers say about the Wrangler WR-GD9T960603BN Gas Furnace?: Rated 5 out of 5 from 3 ratings.