The X-BULL 2S is a 12V electric winch rated at 6,000 lb, built for ATVs, UTVs, boat trailers and light recovery work. It pairs a 1.3 HP motor and a 210:1 gear ratio with a 15 m synthetic rope, and it ships with both a wired remote and a wireless remote with a long range. Its IP68 sealing is the standout against budget winches that only claim splash resistance. Owners rate it well overall, though the slow full-load line speed and the synthetic rope's wear are the usual trade-offs.
In stockShips from China · duties may applyReturn policy
Owners rate it 4.6 out of 5 and mostly praise the sealing, the dual remotes and the pulling strength for the size. Complaints center on slow line speed under load and rope wear.
The X-BULL 2S Series is a 12V DC electric winch with a rated single line pull of 6000 lbs (2721 kg), built for ATV, UTV and trailer use. It carries a synthetic rope measuring Ø0.248 in x 49.8 ft (Ø6.4 mm x 15.2 m).
A 12V DC 1.3 HP motor drives a 3-stage planetary gear system with a 210:1 gear ratio and a sliding ring gear. The line runs at 2.9 feet per minute at full load and 19.7 feet per minute with no load. The unit is rated IP68 waterproof with O-ring rubber gaskets, and the housing has a black matte paint finish.
The winch is controlled by a wired remote with a 4.2 ft cable or a wireless remote with a 100 ft range. An automatic, full-load holding dynamic braking system holds the load. A fairlead, mounting plate and mounting hardware are included for installation.
It checks today's price at every store, compares the alternatives and answers in about a minute.







