Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The X2D AMS Combo is Bambu Lab's second-generation X Series printer, a dual-nozzle machine paired with the AMS 2 Pro for automated multi-color and multi-material printing. It swaps nozzles with a mechanical gear-and-trigger system rather than IDEX, which enables zero-purge support material changes inside a 65°C heated chamber. A PMSM motor with high-frequency flow sensing and a Vision Encoder hold 50-micron accuracy across the build volume. It sits between the entry-level P series and the high-end H series, aimed at engineers, educators and makers who need tight tolerances and clean surface finishes without flagship pricing.
In stockShips from Australia · priced in AUD (A$1,199.00) · duties may applyReturn policy
The Bambu Lab X2D AMS Combo is a dual-nozzle 3D printer paired with the AMS 2 Pro for automated multi-material and multi-color printing. It is the second generation of the X Series and succeeds the X1 series.
The toolhead switches nozzles with a gear-and-trigger mechanism instead of an IDEX design. A nozzle-change lever taps a trigger arm, which drives an internal gear train to swap the nozzles. This allows support materials to be swapped without purging.
The hotend reaches 300°C and the chamber is actively heated to 65°C for materials such as ABS, ASA and nylon. For PLA, a Cool Mode flushes the chamber with cool air through intakes on the left and right. A Permanent Magnet Synchronous Motor (PMSM) senses flow by reading torque and resistance. It tells normal melting from a jam. A Vision Encoder is also included.
