Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The xTool Apparel Printer Plus is a 35.5 cm direct-to-film printer that prints water-based CMYK plus white onto DTF film for pressing onto shirts, hoodies, caps and bags in any fabric or color. Two Epson I1600 heads reach up to 4.6 m²/h at up to 720 x 1800 dpi with G7-certified color. Its edge over conventional DTF setups is upkeep: a built-in ultrasonic humidifier holds 45-65% RH at the heads, white ink circulates, and SmartCycle cleaning plus wet capping after 24 hours idle cut hands-on maintenance. It suits small apparel shops and serious hobbyists printing short runs; it is a 34 kg, 350 W machine that needs 220-240 V power and a heat press to finish prints.
In stockShips from Spain · duties may applyReturn policy
The xTool Apparel Printer Plus is a 35.5 cm direct-to-film (DTF) printer for making custom transfers for T-shirts, hoodies, caps and bags. It works on any fabric and any color. It uses water-based CMYK and white ink and has two Epson I1600 printheads. Print speed is up to 4.6 m²/h, with G7-certified color.
A built-in ultrasonic humidifier, automatic wet capping and SmartCycle maintenance help keep the white ink flowing. Wet capping seals the printheads with moisturizing liquid after 24 hours of inactivity. The HydraFlow damper replaces four narrow white-ink channels with one. A second temperature and humidity sensor sits next to the printheads and reacts in around five seconds.
You design, print and cut the film in xTool Studio. Used with the xTool OS1 Automatic Shaker Oven (sold separately), powder application, shaking and curing are automated. A finished transfer takes around eight minutes, and you then heat-press it onto the garment. Used on its own, the printer outputs printed film that you powder and cure manually, and third-party film can be used. With xTool ink and powder, transfers survive 50+ washes and stretch without cracking. The xTool Studio app lets you check printer status, receive alerts and send jobs from your phone on the same Wi-Fi network.
