This soft cab enclosure fits all 2019-20 Yamaha Wolverine X2 models, including the R-Spec. It includes the two door sides only. It uses your OEM hard roof, windshield and existing rear window. It is available in black only.
The sides are made of heavy-duty ballistic material. They wrap around the roll cage and across the top of the factory door. They attach with self-adhesive snaps (no drilling) or pop rivet snaps (drilling required), chosen in the store's drop-down menu. Velcro is sewn along most of the enclosure so you can choose where it attaches. Small pieces of velcro give better adhesion than long strips.
Each window unzips from the bottom so the door can open fully without unsnapping anything. Each window also unzips from the top for air or for reaching out. The whole side can be removed in seconds in warmer weather. Initial setup of the snaps takes less than 1 hour. After that, the enclosure comes off in about a minute and goes back on in under a minute.
- Fits
- 2019-20 Yamaha Wolverine X2, 2-door, all models including R-Spec
- Color
- Black
- Material
- Heavy-duty ballistic material
- Includes
- Door sides only, all installation hardware, storage bag
- Rear window
- Uses your existing rear window; large rear window gives unobstructed view
- Roof and windshield
- Uses your OEM hard roof and windshield
- Attachment
- Self-adhesive snaps (no drilling) or pop rivet snaps (drilling required)
- Rear window velcro
- Self-adhesive velcro for a hard rear window; sew-on velcro for a soft rear window
- Windows
- Unzip from bottom and from top
- Installation time
- Under 1 hour initial; about 1 minute to remove, under 1 minute to reinstall
- Warranty
- 1 year for quality and workmanship; trailering with the enclosure installed voids it
- Care note
- Velcro and self-adhesive snaps can damage decals if applied over them