Is the YIHUA 926LED-III good for SMD and PCB work?

Yes. The temperature range reaches 896°F and the kit includes fine tips, which suits SMD and small PCB joints. The LED display helps you hold a steady temperature across a board.

What is the difference between 130W maximum and 18W rated power?

The 130W is peak draw during heat-up; the station runs at about 18W rated. It heats fast but holds a modest, steady output, which is fine for electronics and light repair.

What comes in the box?

The station, five soldering tips, a roll of solder wire, a tin sucker and a pair of tweezers. You supply your own stand and sponge if you want them.

Does it work on US outlets?

It is built for AC 110–127V at 60Hz with a US-standard plug, so it plugs into standard US wall power.

Can I switch between Celsius and Fahrenheit?

Yes. The station has a °C/°F conversion function, and you can also correct the displayed temperature digitally if it drifts from a measured reading.

What do buyers say about the YIHUA 926LED-III Digital Soldering Station Iron Kit?

Rated 5 out of 5 from 2 ratings.

Unbranded

YIHUA 926LED-III Digital Soldering Station Iron Kit

Best price now

$60.10at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Unbranded

YIHUA 926LED-III Digital Soldering Station Iron Kit

Best price now

$60.10at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $60.10 at Walmart on Nov 10.

Our take on the YIHUA 926LED-III Digital Soldering Station Iron Kit

The YIHUA 926LED-III is a corded digital soldering station with an LED readout and adjustable heat from 194°F to 896°F. It ships as a kit with five tips, solder wire, a tin sucker and tweezers, so a beginner can start work without extra buys. Its 130W peak rating heats the iron quickly, and the sleep timer and temperature correction are features usually found on pricier stations. Against basic fixed-wattage irons it offers far more control; against brand-name stations it gives up some build refinement and tip quality.

Best forDIY electronics and hobby solderingPCB, SMD and SMT workHome appliance repairBeginners who want a full starter kit

Pros

Wide 194–896°F range covers lead-free solder and small SMD parts
Large LED display shows set and actual temperature
Sleep timer at 0, 5, 10 or 30 minutes cuts idle heat
Ships with five tips, solder wire, tin sucker and tweezers
Side-mounted solder wire holder keeps feed within reach
Switchable °C/°F and digital temperature correction

Cons

Rated power is 18W, so the 130W figure is a peak, not sustained output
Plastic housing feels less solid than metal-bodied stations
Included tips and solder are basic; serious users often upgrade
No stand details beyond the built-in holder; tip changes need cooling time

YIHUA 926LED-III Digital Soldering Station Iron Kit prices at every store

WalmartNew
In stockSold by HomkynminReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$60.10Free shippingChecked Nov 10
Visit Walmart

About the YIHUA 926LED-III Digital Soldering Station Iron Kit

This is a corded digital soldering station kit with a maximum power of 130W. The temperature can be adjusted from 90-480℃ (194-896℉), and an LED display shows the temperature. The station also has digital temperature correction and ℃/℉ conversion.

A solder wire holder is mounted on the side, so the solder wire is easy to pull out and stays steady. The sleep function can be set to 0, 5, 10 or 30 minutes. At 0, the station does not go to sleep.

It is used for soldering SMT, PCB and SMD work, including DIY projects, home appliance repair and factory production. The body is made of plastic and iron. Turn off the power and let the station cool before replacing the tips or other parts.

Material: Plastic, Iron
Color: Black
Power source: Corded electric
Plug type: US standard
Voltage: AC 110V~127V, 60Hz
Maximum power: 130W
Rated power: 18W
Temperature range: 90-480℃ / 194-896℉
Display: LED digital temperature display
Sleep function: 0 / 5 / 10 / 30 minutes
Temp correction: Digital temperature correction; ℃/℉ conversion
Tip ground resistance: Less than 2 ohm
Operating temp: 0-40℃ / 32-104℉
Dimensions: 18 x 7 x 11 cm / 7.09 x 2.76 x 4.33 in
Pen length: 19 cm / 7.48 in, including tip
Package size: 24 x 13 x 13 cm / 9.45 x 5.12 x 5.12 in
Weight: Net 0.95 kg / 2.09 lbs; gross 1 kg / 2.2 lbs
In the box: 1 soldering station, 5 soldering tips, 1 solder wire, 1 tin sucker, 1 pair of tweezers

Specifications

color: BlackSource
size: 18*7*11cm/7.09*2.76*4.33inSource

Questions and answers

Is the YIHUA 926LED-III good for SMD and PCB work?: Yes. The temperature range reaches 896°F and the kit includes fine tips, which suits SMD and small PCB joints. The LED display helps you hold a steady temperature across a board.
What is the difference between 130W maximum and 18W rated power?: The 130W is peak draw during heat-up; the station runs at about 18W rated. It heats fast but holds a modest, steady output, which is fine for electronics and light repair.
What comes in the box?: The station, five soldering tips, a roll of solder wire, a tin sucker and a pair of tweezers. You supply your own stand and sponge if you want them.
Does it work on US outlets?: It is built for AC 110–127V at 60Hz with a US-standard plug, so it plugs into standard US wall power.
Can I switch between Celsius and Fahrenheit?: Yes. The station has a °C/°F conversion function, and you can also correct the displayed temperature digitally if it drifts from a measured reading.
Where is the YIHUA 926LED-III Digital Soldering Station Iron Kit cheapest?: At Walmart, for $60.10, as of our latest check.
What do buyers say about the YIHUA 926LED-III Digital Soldering Station Iron Kit?: Rated 5 out of 5 from 2 ratings.