
Z9V5Pro-MK6 4 Extruders Multi Color Enclosed Frame CoreXY FDM 3D Printer DIY Kit
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Zonestar Z9V5Pro-MK6 is a DIY kit for an enclosed CoreXY FDM 3D printer with four extruders feeding a mixing hotend. It can blend filaments to print up to 16 colors, with a built-in mixing engine for gradients and random color patterns. It ships 95% pre-assembled and adds bed auto leveling, filament runout detection, power-loss resume and auto power-off. It suits hobbyists who want multicolor printing from a single machine and are comfortable finishing assembly and tuning a kit; single-color printers are simpler and cheaper, but none of them mix colors the way this one does.
In stockShips from China · duties may applyReturn policy
The Z9V5Pro-MK6 is a DIY FDM 3D printer kit with an enclosed CoreXY frame and four extruders. It comes 95% pre-assembled. The build volume is 300 x 300 x 400 mm.
A 32-bit control board runs the printer, and a 3.5-inch full-color TFT-LCD shows the 480 x 272 dot interface. The 4-in-1-out non-mix color hotend has a 0.4 mm nozzle, and the heatbed is rated at 24 V 350 W. The printer uses a 110 V/220 V, 50/60 Hz power supply.
The printer supports multi-color printing and can print a one-color model in multiple colors. It works with PLA, PLA+, PVA, PETG, and other materials. It has automatic bed leveling, filament runout detection, and resume after power failure. It can power off automatically after printing and runs at less than 55 dB.
It checks today's price at every store, compares the alternatives and answers in about a minute.







