
Zigbee Wireless Human Presence Sensor
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a Zigbee presence sensor that pairs mmWave radar with PIR motion detection to catch both still and moving people, rated for 6 m range and a 120° field. It runs on a 5V USB-C cable, so it needs a nearby outlet or re-wiring if you ceiling-mount it, and it needs a separate Zigbee hub to work with Tuya or SmartLife. The radar side is the draw: it detects breathing and small movements, so lights stay on while someone sits still, which plain PIR sensors fail at. The trade-offs are the hub requirement, 2.4 GHz-only setup and the short 48 cm cable.
In stockReturn policy
The Zigbee Wireless Human Presence Sensor is an indoor presence and motion detector that combines mmWave radar with PIR sensing. It measures 0.49"D x 2.35"W x 2.35"H and mounts on a wall.
The radar picks up subtle movement such as a turning head, a raised hand, page turning or a slight body tilt, as well as walking, running and jumping. It also detects a person who is standing still, sitting or squatting. The 120° detection angle covers a distance of up to 6 meters, which can be adjusted, and a minimum and maximum distance can be set for the alarm area. Radar detection is not affected by heat, light sources or airflow and can pass through fabrics, plastics and glass curtain walls.
The sensor runs on a USB cable 48 cm (18.9 in) long with a DC 5V Type-C power interface. It connects through Zigbee and needs a Zigbee gateway hub, which is the control center of the smart home; setup uses a phone on the same 2.4 GHz Wi-Fi network as the hub. Status and history are shown in the Tuya Smart or SmartLife app. A built-in light chip reads illumination from 0 to 1000 lux and keeps a 7-day illumination curve, and smart scenes can trigger lights, alarms and camera recording.