

The ZK-1002T is a bare class D amplifier board built around two TPA3116D2 chips, rated at 100W per channel into a 2.0 stereo setup. It takes Bluetooth 5.0 or a wired AUX input and adds treble and bass knobs, running from a DC 12-24V supply. It suits DIY builders putting sound into a speaker box, cabinet or portable build, not shoppers wanting a finished amp with a case and terminals. Against finished TPA3116 amps it is cheaper and more flexible to mount, but you supply the enclosure, wiring and power brick, and the 100W figure assumes a 24V supply and low-impedance speakers.
In stockReturn policy
Owners of TPA3116-based boards like this generally report clean, loud sound for the size and money, and like the tone controls. Common complaints are hiss at high gain, weak output on 12V supplies, and the need to add your own heatsink and shielding.
The ZK-1002T is a 2.0-channel Bluetooth amplifier board built around dual TPA3116D2 chips. It uses class D technology with PurePath and delivers a maximum output of 100W + 100W. It is designed for passive speakers rated 20–200W at 4–8 ohms.
The board accepts Bluetooth 5.0 or AUX input and has treble and bass controls. It runs on DC 12V–24V. Output power depends on the input voltage and current and on speaker impedance; under the same conditions, lower speaker impedance produces more power.
The board has a large heat sink and high-grade wiring terminals. Protection covers over-voltage, under-voltage, over-temperature, reverse connection, and short circuits. The power switch is a standby switch; to completely turn off power, unplug the DC plug.
It checks today's price at every store, compares the alternatives and answers in about a minute.