
ZOUPW 180W Bifacial Rigid Solar Panel
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The ZOUPW 180W is a rigid bifacial solar panel built for RV, camper van and off-grid use. It uses N-type monocrystalline cells rated at 25.6% cell efficiency, with a stated degradation under 0.4% per year, and its bifacial design can also collect light reflected onto the rear face. The build is serious for a portable panel: 3.2mm tempered glass, EPE encapsulation, 16-busbar SMBB cell connections and an anodized aluminum frame. It suits van lifers and off-grid setups that want a fixed-mount panel with long-term output, though it is heavier and less packable than a folding suitcase panel.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
The ZOUPW 180W Bifacial Rigid Solar Panel is built for RVs, camper vans, boats and other off-grid setups. It uses Grade-A+ N-Type monocrystalline cells with 25.6% cell efficiency and annual power degradation below 0.4%. The rear side also collects reflected light, which can raise power yield by up to 30% on snow, 20% on sand or 15% on light concrete.
The panel has a dual-parallel internal circuit with 2 integrated bypass diodes. Shading on one section does not stop the unshaded sections from producing power, and the design reduces hot-spot risk. An industrial white back separation mesh reduces the front-side light loss common in bifacial modules.
It has a 3.2mm tempered glass front, EPE encapsulation, SMBB 16-busbar technology and an anodized aluminum frame. Universal pre-drilled holes fit Z-brackets, tilt mounts, side mounts and pole brackets. Plug-and-play connectors let you wire panels in parallel for 12V battery charging or in series for 24V setups. The panel works with MPPT solar charge controllers, power stations, and deep-cycle AGM and LiFePO4 battery banks.








