StoreDeal.ai store
Shop
  • Deals
  • Deal checker
  • Black Friday
  • Buying guides
  • Brands
  • Stores
Travel
  • Flight deals
  • Hotel deals
Company
  • Research
  • Press
  • Use in AI assistants
  • Contact
  • deal.ai apps
Black Friday 2026
  • Walmart
  • Best Buy
  • Target
  • TVs
  • Laptops
  • Headphones
  • Apple
  • Gaming
  • Vacuums
  • Kitchen
  • Toys
  • Smartwatches
  • Tablets
  • Furniture
  • Mattresses
© Deal.ai Inc.·2222 Ponce de Leon Blvd, Miami, FL 33134·support@deal.ai
TermsPrivacy
Deal.ai › Compare

Binary EP321 MEMS IEMs vs Tanchjim OLA II In-Ear Monitors

The Binary EP321 is the more ambitious set: a six-driver tribrid with a MEMS tweeter, stainless steel faceplates and a very low 13Ω impedance that needs a clean, low-noise source. The Tanchjim OLA II is the simpler, safer pick: a coaxial 1DD+1BA with low distortion, a USB-C DSP cable and tuning you can adjust in software. Reviewers and owners describe the EP321 as bright, detailed and energetic up top, with the MEMS unit adding air but also hiss on noisy sources; the OLA II is widely called balanced, smooth and easy to fit for long sessions. Buy the EP321 for detail and treble sparkle, the OLA II for a neutral all-rounder that is easy to drive and tune.

  • Choose the Binary EP321 if you want a detail-forward tribrid with a MEMS tweeter, stainless steel build and a 4.4mm balanced option, and you have a quiet source.
  • Choose the Tanchjim OLA II if you want a balanced coaxial hybrid with very low distortion, DSP tuning and a USB-C cable that works straight from a phone or laptop.

Prices

  • Binary EP321 MEMS IEMs: $254.19 at HiFiGo (checked today)
  • Tanchjim OLA II In-Ear Monitors: $65.00 at SAM Audio SG (checked today)
  • Difference: the Tanchjim OLA II In-Ear Monitors is $189.19 cheaper than the Binary EP321 MEMS IEMs today
Binary
Binary EP321 MEMS 2DD + 3BA + 1 MEMS Driver IEMs

Binary EP321 MEMS IEMs

Binary EP321 MEMS 2DD + 3BA + 1 MEMS Driver IEMs

5(5 ratings)
$254.19at HiFiGoChecked 2 h ago
See all prices and details
Visit HiFiGo
Pros
  • Six drivers per side with a dedicated MEMS tweeter for treble air
  • Stainless steel faceplates and 3D printed cavities feel premium
  • Very high sensitivity, so it gets loud from weak outputs
  • Balanced 4.4mm option suits desktop and DAP setups
  • Wide 8Hz–40kHz rated range
Cons
  • 13Ω impedance makes source hiss audible
  • MEMS and piezo drivers can hum or hiss on noisy gear
  • Fixed tuning with no app or DSP
  • Larger shells may not suit small ears
  • Under 1% THD is looser than the OLA II's figure
Tanchjim
Tanchjim OLA II 1DD + 1BA In-ear Monitors

Tanchjim OLA II In-Ear Monitors

Tanchjim OLA II 1DD + 1BA In-ear Monitors

$65.00at SAM Audio SGChecked 4 h ago
See all prices and details
Visit SAM Audio SG
Pros
  • Very low 0.03% THD for clean output
  • Coaxial DD+BA layout gives coherent imaging
  • DSP Master app lets you adjust tuning
  • USB-C cable works directly with phones and laptops
  • Vented, ergonomic shell built from thousands of ear scans
Cons
  • Only two drivers per side, less treble extension
  • USB-C termination limits use with 3.5mm or 4.4mm gear
  • Needs more power at 30Ω than the EP321
  • No balanced plug option out of the box

What separates them

Binary EP321 MEMS IEMsTanchjim OLA II In-Ear Monitors
Driver setup10mm DD, 6mm passive radiator, 3 BA and 1 MEMS tweeter per side10mm DMT 5 dynamic driver plus 1 BA in a coaxial layout
Impedance and sensitivity13Ω at 1kHz, 122dB/Vrms — very easy to drive but sensitive to source noise30Ω, 121dB/Vrms — needs a little more power and is less prone to hiss
DistortionTHD+N under 1%THD 0.03% at 1kHz, 94dB
Cable terminationDetachable 0.78mm 2-pin, 3.5mm or 4.4mm plugDetachable 0.78mm 2-pin, USB-C termination with DSP
Tuning controlFixed three-way crossover, no app or DSPDSP Master app tuning through the USB-C cable
Build3D printed resin cavity with CNC stainless steel faceplates, 7.5g per shellMolded shell shaped from 3,000+ ear scans, vented to relieve pressure
Noise floorMEMS and piezoelectric drivers can produce a faint hiss or hum on some sourcesConventional DD+BA design, no MEMS-related hiss reported
Fit and long-session comfortLarger hybrid shell, weight concentrated in the steel faceplateSmaller coaxial shell designed for extended listening

Prices at every store

Binary EP321 MEMS IEMs

  • HiFiGoNew

    In stockShips from abroad · duties may applyReturn policy

    $254.19Checked 2 h ago
    Visit HiFiGo
Prices and history →

Tanchjim OLA II In-Ear Monitors

  • SAM Audio SGNew

    In stockReturn policy

    $65.00Checked 4 h ago
    Visit SAM Audio SG
Prices and history →

Specs compared

SpecBinary EP321 MEMS IEMsTanchjim OLA II In-Ear Monitors
Impedance13Ω@1kHz30Ω ±10%
Sensitivity122dB/Vrms121dB/Vrms
Frequency Response8Hz~40kHz8Hz–48kHz
Driver Setup10mm DD+ 6mm Passive Diaprhagm+3BA+1 MEMS—
THD+N<1%—
Connector Type0.78mm 2-Pin—
Termination Plug3.5mm/4.4mm—
Weight7.5 grams—
Crossover DesignThree-Way Frequency Crossover—
Housing MaterialHigh-Precision 3D Printed Ear Cavity—
Face Panel MaterialStainless Steel—
ConnectivityWired—
Show all 20 specsShow fewer specs
SpecBinary EP321 MEMS IEMsTanchjim OLA II In-Ear Monitors
Driver Type—1DD DMT 5 Ø10mm + 1BA
Acoustic Structure—Coaxial hybrid acoustic structure
THD—0.03%@1kHz 94dB
Cable Structure—Silver-plated copper Litz wire with a twisted s…
Earphone Connectors—CIEM 0.78mm
Cable Termination—USB-C
Supported Sample Rates—PCM 32bit 384kHz
Color—Gray

What reviewers say

Binary EP321 MEMS IEMs

Reviewers and owners highlight the EP321 as the world's first direct-drive MEMS hybrid, noted for its high-precision 3D printed resin ear cavities and complex six-driver setup. While the technical performance is praised, the presence of a soft hiss is a known trade-off of the driver technology.

What people mention
  • TreblePraisedThe MEMS tweeter provides exceptional extension and airy detail in the high frequencies.
  • Noise floorMixedUsers may notice a soft hiss or hum, which is a normal characteristic of the piezoelectric driver type.
  • Build qualityPraisedThe combination of 3D printed resin and CNC-machined stainless steel feels premium and precise.

Questions and answers

Which is better for detail and treble?
The Binary EP321. Its MEMS tweeter and three balanced armatures give more upper-end detail and air than the OLA II's single BA. The trade-off is that the EP321 reveals hiss on noisy sources.
Which is easier to drive from a phone?
The EP321 is easier to drive on paper at 13Ω and 122dB/Vrms, but the OLA II's USB-C cable plugs straight into a phone with its own DSP, so it works without a dongle. For a plain 3.5mm phone output, the EP321 gets louder.
Which has lower distortion?
The Tanchjim OLA II, rated at 0.03% THD at 1kHz and 94dB. The EP321 is rated under 1% THD+N, a looser figure. Lower distortion does not automatically mean better sound, but the OLA II measures cleaner.
Is the EP321 worth stepping up to over the OLA II?
Yes if you want a tribrid with a MEMS tweeter, stainless steel build and a 4.4mm balanced option, and you have a quiet source. If you want a neutral, easy-fitting set with app tuning, the OLA II covers that without the extra complexity.
Which is more comfortable for long listening?
The OLA II. Its shell is shaped from thousands of ear scans and vented to relieve pressure, and it is the smaller of the two. The EP321's steel faceplate adds weight and its hybrid shell is larger.
Can I use the OLA II with a balanced amp?
Not with the included cable, which terminates in USB-C. You would need a separate 0.78mm 2-pin cable with a 3.5mm or 4.4mm plug. The EP321 ships with a 3.5mm or 4.4mm plug option.

Ask our shopping agent

It checks today's price at every store, compares the alternatives and answers in about a minute.

Enter to send, Shift+Enter for a new line

More comparisons

  • Kiwi Ears Halcyon vs Binary EP321 MEMS 2DD + 3BA + 1 MEMS Driver IEMs
  • Kiwi Ears Halcyon vs Tanchjim OLA II 1DD + 1BA In-ear Monitors
  • Binary EP321 MEMS vs Tanchjim OLA II 1DD + 1BA In-ear Monitors

Buying guides that pick them

  • Best MEMS driver in-ear monitor earphones