StoreDeal.ai store
Shop
  • Deals
  • Deal checker
  • Black Friday
  • Buying guides
  • Brands
  • Stores
Travel
  • Flight deals
  • Hotel deals
Company
  • Research
  • Press
  • Use in AI assistants
  • Contact
  • deal.ai apps
Black Friday 2026
  • Walmart
  • Best Buy
  • Target
  • TVs
  • Laptops
  • Headphones
  • Apple
  • Gaming
  • Vacuums
  • Kitchen
  • Toys
  • Smartwatches
  • Tablets
  • Furniture
  • Mattresses
© Deal.ai Inc.·2222 Ponce de Leon Blvd, Miami, FL 33134·support@deal.ai
TermsPrivacy
Deal.ai › Compare

Kiwi Ears Halcyon vs Binary EP321 MEMS IEMs

Both are MEMS-hybrid in-ears with a neutral-leaning tuning, so the choice comes down to fit and drive. The Kiwi Ears Halcyon is lighter, ships with six swappable nozzle filters and a modular 3.5/4.4 mm cable, and owners rate its sound well above the Orchestra Lite. The Binary EP321 adds a passive radiator and a stainless-steel faceplate, but its 13-ohm, 122 dB/V sensitivity makes it far easier to drive and more prone to hiss on noisy sources. Pick the Halcyon for tuning flexibility and lighter shells; pick the EP321 for a sturdier build and a more sensitive, bass-augmented presentation.

  • Choose the Kiwi Ears Halcyon if you want six nozzle filters to tune the sound yourself, a lighter shell, and a modular 3.5/4.4 mm cable in the box.
  • Choose the Binary EP321 if you want a stainless-steel faceplate, a passive radiator for extra low-end weight, and an easy-to-drive 13-ohm load.

Prices

  • Kiwi Ears Halcyon: $220.15 at kiwiears (checked today)
  • Binary EP321 MEMS IEMs: $254.19 at HiFiGo (checked today)
  • Difference: the Kiwi Ears Halcyon is $34.04 cheaper than the Binary EP321 MEMS IEMs today
Kiwi Ears
Kiwi Ears Halcyon

Kiwi Ears Halcyon

$220.15at kiwiearsChecked 4 h ago
See all prices and details
Visit kiwiears
Pros
  • Six nozzle filters let you adjust treble and bass balance physically.
  • Light aluminum shells at about 6 g per side.
  • Modular cable includes both 3.5 mm and 4.4 mm plugs.
  • Owners rate the sound well above the Kiwi Ears Orchestra Lite.
  • Optional boom-mic cable for gaming.
Cons
  • Included ear tips reportedly fall out and fit is hard to dial in.
  • 29 ohms and 109 dB/mW need more power than the EP321.
  • No passive radiator, so sub-bass weight depends on the filter choice.
Binary
Binary EP321 MEMS 2DD + 3BA + 1 MEMS Driver IEMs

Binary EP321 MEMS IEMs

Binary EP321 MEMS 2DD + 3BA + 1 MEMS Driver IEMs

5(5 ratings)
$254.19at HiFiGoChecked 2 h ago
See all prices and details
Visit HiFiGo
Pros
  • Passive radiator adds low-end weight beyond a single dynamic driver.
  • 13 ohms and 122 dB/Vrms run loud from a phone or dongle.
  • Stainless-steel faceplate feels more durable than plain resin.
  • Three-way crossover separates the driver ranges cleanly.
  • Compact 15.4 mm³ MEMS tweeter.
Cons
  • Very low impedance makes source hiss and output impedance more audible.
  • Heavier at 7.5 g per side than the Halcyon.
  • No swappable filters, so tuning is fixed.
  • Manufacturer warns of a possible soft hiss from the MEMS unit.

What separates them

Kiwi Ears HalcyonBinary EP321 MEMS IEMs
Driver setup10 mm dynamic, 3 balanced armatures, 1 MEMS10 mm dynamic, 6 mm passive radiator, 3 balanced armatures, 1 MEMS
Impedance29 ohms13 ohms
Sensitivity109 dB at 1 kHz/mW122 dB/Vrms
Tuning adjustmentSix interchangeable nozzle filtersFixed acoustic design
Shell materialAerospace-grade aluminum, about 5.99 g per side3D-printed resin cavity with stainless-steel faceplate, 7.5 g
Cable plugsModular 3.5 mm single-ended and 4.4 mm balanced3.5 mm or 4.4 mm termination
Fit reportsOwners report included tips fall out and fit is hard to get rightResin cavity shaped for a deeper fit; no widespread fit complaints
ExtrasOptional gaming boom-mic cableNo mic option listed

Price history

$220.15$220.15
Nov 7Nov 13
  • Kiwi Ears Halcyon: lowest $220.15 on Nov 7 at eBay; $220.15 on Nov 13.

Prices at every store

Kiwi Ears Halcyon

  • kiwiearsNew

    In stockReturn policy

    $220.15Checked 4 h ago
    Visit kiwiears
  • Linsoul AudioNew

    In stockShips from abroad · duties may applyReturn policy

    $220.15Checked 4 h ago
    Visit Linsoul Audio
  • eBayNew

    In stock

    $220.15Free shippingChecked Nov 12
    Visit eBay
  • AmazonNew

    Availability unknown

    As an Amazon Associate, Deal.ai earns from qualifying purchases.

    $220.15Free shippingChecked Nov 9
    Visit Amazon

Also available at

  • Linsoul AudioCheck price at Linsoul Audio

Store links may earn us a commission.

All 6 stores and price history →

Binary EP321 MEMS IEMs

  • HiFiGoNew

    In stockShips from abroad · duties may applyReturn policy

    $254.19Checked 2 h ago
    Visit HiFiGo
Prices and history →

Specs compared

SpecKiwi Ears HalcyonBinary EP321 MEMS IEMs
Sensitivity109dB (at 1kHz/mW)122dB/Vrms
Weight5.99g7.5 grams
ConnectivityWiredWired
Drivers1DD + 1MEMS + 3BA—
Driver configurationTribrid—
Driver technologyDynamic Driver, Balanced Armature, MEMS—
Cable connector0.78 mm 2-pin—
Rated impedance29 ohms—
Rated sensitivity5mW—
Maximum power handling10mW—
Frequency Response Range10-42kHz—
Distortion<1% (at 1kHz)—
Show all 36 specsShow fewer specs
SpecKiwi Ears HalcyonBinary EP321 MEMS IEMs
L/R Channel Imbalance<1.5dB—
Connector0.78mm 2Pin detachable—
Cable Material4N Single Crystal Copper—
Cable Length122CM+/-2CM—
Nozzle Size6.2mm—
Stecker| 3,5mm, 4,4mm—
Nennimpedanz29 Ohm—
Nennempfindlichkeit5 mW—
Maximale Belastbarkeit10 mW—
Empfindlichkeit

What reviewers say

Kiwi Ears Halcyon

Owners rate the Halcyon highly for its detail and neutral tuning, and at least one reviewer puts it well above the Kiwi Ears Orchestra Lite. The main complaint is the stock ear tips, which some buyers say do not fit well and keep falling out.

What people mention
  • Sound qualityPraisedReviewers say it beats the Kiwi Ears Orchestra Lite and delivers detailed, neutral sound.
  • Ear tip fitCriticisedBuyers complain the included tips do not fit well and keep falling out.
  • TrebleMixedThe MEMS driver gives fast, high-resolution highs, but the 3 kHz peak can sound sharp to some.
  • Tuning filtersMixedSix nozzle filters let owners shape the sound, though swapping them adds setup work.

Binary EP321 MEMS IEMs

Reviewers and owners highlight the EP321 as the world's first direct-drive MEMS hybrid, noted for its high-precision 3D printed resin ear cavities and complex six-driver setup. While the technical performance is praised, the presence of a soft hiss is a known trade-off of the driver technology.

What people mention
  • TreblePraisedThe MEMS tweeter provides exceptional extension and airy detail in the high frequencies.
  • Noise floorMixedUsers may notice a soft hiss or hum, which is a normal characteristic of the piezoelectric driver type.
  • Build qualityPraisedThe combination of 3D printed resin and CNC-machined stainless steel feels premium and precise.

Questions and answers

Which is better for classical and orchestral music?
The Halcyon. Kiwi Ears tunes it as a studio-monitor neutral with an 8 dB sub-bass shelf, and its nozzle filters let you trim treble if strings get sharp. The EP321 leans warmer from the passive radiator.
Which is easier to drive from a phone?
The EP321. At 13 ohms and 122 dB/Vrms it reaches loud volumes from a basic dongle. The Halcyon at 29 ohms and 109 dB/mW benefits from a dedicated player or amp.
Which has the sturdier build?
The EP321's stainless-steel faceplate resists scratches better. The Halcyon's aluminum shell is lighter, which matters over long listening sessions.
Is the Halcyon worth stepping up to over the EP321?
Only if you want the six nozzle filters and the modular cable. On raw driver count the EP321 has more, but the Halcyon's tuning flexibility is the real difference.
Will either one hiss on a noisy source?
The EP321 is more likely to. Its low impedance and high sensitivity pick up background noise, and Binary notes a possible soft hiss from the MEMS driver. The Halcyon is less sensitive to this.
Do the Halcyon's included tips cause fit problems?
Several owners say the stock tips fall out and the fit takes work. Budget for aftermarket tips if you choose the Halcyon.

Ask our shopping agent

It checks today's price at every store, compares the alternatives and answers in about a minute.

Enter to send, Shift+Enter for a new line

More comparisons

  • Binary EP321 MEMS vs Kiwi Ears Halcyon
  • Binary EP321 MEMS 2DD + 3BA + 1 MEMS Driver IEMs vs Tanchjim OLA II 1DD + 1BA In-ear Monitors
  • Binary EP321 World's First MEMS Tribrid IEM - 2DD+3BA+MEMS Direct Drive vs Kiwi Ears Halcyon
  • Kiwi Ears Halcyon vs KZ ZAR Hybrid Driver In-Ear Monitors
  • Kiwi Ears Cadenza vs Kiwi Ears Halcyon
  • Kiwi Ears Halcyon vs M6 PRO Noise-Isolating Musician’s In-Ear Monitors
  • Kiwi Ears Halcyon vs Tanchjim OLA II 1DD + 1BA In-ear Monitors
  • Ak3file in Ear Monitors vs Kiwi Ears Halcyon

Buying guides that pick them

  • Best MEMS driver in-ear monitor earphones
109 dB (bei 1 kHz/mW)
—
Frequenzbereich10–42 kHz—
Verzerrung<1 % (bei 1 kHz)—
L/R-Kanalabweichung<1,5 dB—
Anschluss0,78 mm 2-Pin, abnehmbar—
StyleIn-ear—
Driver Setup—10mm DD+ 6mm Passive Diaprhagm+3BA+1 MEMS
Impedance—13Ω@1kHz
Frequency Response—8Hz~40kHz
THD+N—<1%
Connector Type—0.78mm 2-Pin
Termination Plug—3.5mm/4.4mm
Crossover Design—Three-Way Frequency Crossover
Housing Material—High-Precision 3D Printed Ear Cavity
Face Panel Material—Stainless Steel