Which is better for multi-color printing?

The Flashforge Creator 5 Pro, because its four independent toolheads switch without purging, so multi-color parts print faster and use less filament. The P1S Combo with AMS is simpler to set up and can reach 16 colors with extra AMS units, but it purges at each change.

Which handles ABS and ASA better?

The Creator 5 Pro, thanks to its actively heated chamber up to 65°C and HEPA/carbon filtration. The P1S is enclosed but has no chamber heater, so large ABS parts are more prone to warping.

Which is easier for a beginner?

The P1S Combo. It arrives essentially calibrated, sets up in about 15 minutes, and has a mature slicer with profiles for most filaments. The Creator 5 Pro automates calibration too, but its four-toolhead workflow asks more of the user.

Is the Creator 5 Pro worth stepping up to over the P1S Combo?

Only if multi-color or multi-material printing is a core use. If you mostly print single-color PLA and PETG, the P1S Combo covers it with less waste and a bigger owner base.

Which has the larger build volume?

They are the same: both print a 256 × 256 × 256 mm cube.

Which is more proven over time?

The P1S Combo, with thousands of ratings and a large community documenting fixes. The Creator 5 Pro has far fewer ratings, so its long-term record is thinner.

Flashforge Creator 5 Pro vs Bambu Lab P1S Combo with AMS

Buy the Bambu Lab P1S Combo if you want a printer that works out of the box and has a huge, proven user base. Buy the Flashforge Creator 5 Pro if you print multi-color or multi-material parts regularly and want to stop wasting filament on purges. The Flashforge wins on color efficiency and chamber heat; the Bambu wins on software polish, camera monitoring and owner track record.

Choose the Flashforge Creator 5 Pro if you print multi-color or multi-material jobs often and want four independent toolheads with no purge waste and a heated chamber.
Choose the Bambu Lab P1S Combo if you want a proven, near-plug-and-play enclosed printer with AMS color switching, a built-in camera and a large base of owners and profiles.

Prices

Flashforge Creator 5 Pro: $749.00 at 3dprintersdepot.com (last seen Nov 12)
Bambu Lab P1S Combo with AMS: $479.00 at B&H Photo-Video-Audio (last seen Nov 13)
Difference: the Bambu Lab P1S Combo with AMS is $270.00 cheaper than the Flashforge Creator 5 Pro at the latest prices (Nov 12 and Nov 13)

	Flashforge Creator 5 Pro	Bambu Lab P1S Combo with AMS
Color system	Four independent toolheads, each with its own nozzle, extruder and heater; switching takes about 7 seconds with no purge	Single extruder with AMS feeding up to four spools, up to 16 colors with multiple AMS units; each switch purges filament
Filament waste on color changes	Zero purge waste because each toolhead carries its own filament	Purges filament at every color change, which adds up on multi-color models
Chamber heating	Actively heated chamber up to 65°C for ABS, ASA and other warp-prone materials	Enclosed body but no active chamber heater; chamber heat comes from the bed and hotend
Build volume	256 × 256 × 256 mm cube	256 × 256 × 256 mm cube
Speed and acceleration	Up to 300 mm/s print, 600 mm/s travel, 30,000 mm/s² acceleration	Up to 500 mm/s print, 20,000 mm/s² acceleration
Setup and software	Automatic toolhead offset calibration and auto-leveling, but a newer ecosystem with fewer shared profiles	Ships calibrated, set up in about 15 minutes, mature slicer with profiles for most filaments
Monitoring	No built-in camera listed	Built-in camera for remote monitoring and timelapses
Owner feedback	4.6 from 10 ratings, a small sample	4.8 from 2,578 ratings, a large and well-documented user base

Spec	Flashforge Creator 5 Pro	Bambu Lab P1S Combo with AMS
Display	4-inch, 800 × 480 Full-Color Touchscreen	Yes
Width (")	256.0	15.3
Build volume	256 × 256 × 256 mm	—
Toolheads	4 Independent Toolheads	—
Max extruder temp	320°C	—
Max bed temp	120°C	—
Active chamber temp	Up to 65°C	—
Print speed	Up to 300 mm/s	—
Travel speed	Up to 600 mm/s	—
Acceleration	Up to 30,000 mm/s²	—
Layer thickness	0.1–0.4 mm	—
Standard nozzle	0.4 mm	—

Spec	Flashforge Creator 5 Pro	Bambu Lab P1S Combo with AMS
Connectivity	USB / Wi-Fi	—
Number Of Extruders	4 extruders	—
Four independent toolheads	zero-purge color at a mid-range price	—
Extruder	—	Single
Print Technology	—	FDM
Wi-Fi	—	Yes
USB	—	No
Print Speed (max) (mm/s)	—	500.0
Depth (")	—	15.3
Type of Memory Card

Flashforge Creator 5 Pro vs Bambu Lab P1S Combo with AMS

Prices

Flashforge Creator 5 Pro vs Bambu Lab P1S Combo with AMS

Prices

Flashforge Creator 5 Pro

Bambu Lab P1S Combo with AMS

What separates them

Price history

Prices at every store

Flashforge Creator 5 Pro

Bambu Lab P1S Combo with AMS

Specs compared

What reviewers say

Flashforge Creator 5 Pro

Bambu Lab P1S Combo with AMS

Questions and answers

Ask our shopping agent

Buying guides that pick them

Flashforge Creator 5 Pro

Bambu Lab P1S Combo with AMS

What separates them

Price history

Prices at every store

Flashforge Creator 5 Pro

Bambu Lab P1S Combo with AMS

Specs compared

What reviewers say

Flashforge Creator 5 Pro

Bambu Lab P1S Combo with AMS

Questions and answers

Ask our shopping agent

More comparisons

Buying guides that pick them