Victron Energy Argofet 200-2AC Battery Isolator vs REDARC SBI12 Battery Isolator
These solve the same problem in different ways. The Argofet 200-2AC is a diode-based isolator: it splits charge from one alternator or charger to two banks with almost no voltage loss, and it handles 200A, so it suits high-output alternators and big banks. The REDARC SBI12 is a voltage-sensing relay: it connects the auxiliary battery only when the main battery is charging, and it is rated 100A continuous with a 400A inrush. Buy the Victron for a fixed dual-bank charging split on a boat or truck with a large alternator; buy the REDARC for a simple start-plus-auxiliary setup where you want automatic connect and disconnect. Owners of both report reliable, set-and-forget behavior; the Victron is heavier and needs wiring to both banks, while the REDARC is small and light but limited to 100A continuous.
- Choose the Victron Energy Argofet 200-2AC if you have a high-output alternator or charger and two battery banks that must charge at once with minimal voltage drop.
- Choose the REDARC SBI12 if you run a 12V start battery plus one auxiliary battery and want automatic connect and disconnect with fault indication.
Prices
- Victron Energy Argofet 200-2AC Battery Isolator: $119.85 at American Diving Supply (checked today)
- REDARC SBI12 Battery Isolator: $131.00 at Upfitters (last seen Nov 10)
- Difference: the Victron Energy Argofet 200-2AC Battery Isolator is $11.15 cheaper than the REDARC SBI12 Battery Isolator at the latest prices (Nov 10 and Nov 17)

