

The Jet JJP-10BTOS is a benchtop machine that joints and planes on one 10-inch platform, so a small shop gets both operations without two footprints. A 13 A motor drives two straight high-speed steel knives, and the aluminum fence and locking tables are built for repeatable, straight cuts. The steel stand lets it move from bench to floor, and the outfeed table adjusts to reduce snipe on long boards. It suits hobbyists and space-limited shops; serious shops that run wide or figured stock daily will want a helical-head combo or separate floor machines.
In stockReturn policy
Owners of benchtop jointer/planer combos like this one generally value the space saved and the solid cut quality for the size. Common complaints center on knife maintenance, changeover time and snipe on long boards.
The JJP-10BTOS is a bench-top jointer and planer combo that switches between jointing and planing. It has a 13 A, 120 V motor, a 9,000 RPM cutterhead, and two high-speed steel knives. A rigid steel stand lets it move from a bench top to the floor, and an integrated cord wrap stores the cord for transport.
The jointer table measures 36" x 10-1/4", and the planer table measures 10-3/4" x 10-1/2". The table top is precision ground, and the aluminum extruded fence measures 4-7/8" x 25" and tilts from 90° to 45° R. A sheet-metal outfeed table adjusts in height to support long workpieces and help reduce snipe.
The jointer has a maximum cutting width of 10" and a maximum stock removal of 1/8". The planer handles stock up to 4-1/2" thick, with a maximum depth of cut of 5/64" and a minimum workpiece length of 6". The feed rate is 19.5 fpm. Switching between jointer and planer modes typically takes a few minutes.
It checks today's price at every store, compares the alternatives and answers in about a minute.
