
11.1V 1800mAh 3S Lipo Battery With XT60 Plug
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A 3S lithium-polymer pack rated 11.1V and 1800mAh with a 75C discharge rating and an XT60 connector. It measures about 68x43x23mm and weighs about 163g, sized for smaller RC cars, boats and helicopters that run 3S power. The 75C rating suggests it can feed high-draw motors, but the capacity is modest next to the 3000-5000mAh packs many bashers use, so runtimes will be shorter. It is a budget pack with no brand reputation behind it, so check cell balance and connector solder before trusting it in an expensive model.
In stockSold by linxiaofengshangReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
This is a 3S lithium polymer (Lipo) battery pack rated 11.1V and 1800mAh, with a 75C discharge rating. It comes with an XT60 output plug and is made for RC cars, boats and helicopters.
The pack measures approximately 68 x 43 x 23 mm (2.7 x 1.7 x 0.9 in) and weighs approximately 163 g (5.7 oz).
Charge it only with a lithium battery charger. Check the battery before charging and use, and don't charge it unattended or overcharge it. Charge it on a heat-resistant surface. Don't overheat, over-discharge or short-circuit it.