This is a 3S (3-cell) LiPo battery pack for RC cars, trucks and airplanes. It is rated 5000mAh at 11.1V and comes with an XT90 output connector.
It suits 1/5, 1/7 and 1/10 scale RC cars, the FMS 1/10 Canyon RS and E-flite 1.5 m airplanes. Traxxas models it is used with include the Drag Slash, Sledge, E-Revo VXL, XO-1 and Rustler VXL. ARRMA models include the Typhon and Outcast. Vehicles with TRX connectors need an XT90-to-TRX adapter. The XT90 connector has lower resistance than XT60 and runs cooler under load.
The pack only fits if both the voltage and the plug match the vehicle. Stop charging when a cell reaches 4.2V. Normal cell voltage is 3.7V to 4.2V. If a new battery won't hold a full charge, use a balance charger and cycle it several times.
- Capacity
- 5000mAh
- Voltage
- 11.1V, 3-cell, 3S1P
- Charge rate
- 5C max
- Output connector
- XT90
- Balance connector
- JST / XH
- Wire
- 10 AWG
- Dimensions
- 27 x 51 x 151 mm (1-5 mm measuring difference)
- Weight
- Approx. 422 g (±5 g)
- Stock number
- 500703
- Compatibility
- 1/5, 1/7 and 1/10 scale RC cars; FMS 1/10 Canyon RS; E-flite 1.5 m airplanes; Traxxas Drag Slash, Sledge, E-Revo VXL, XO-1, Rustler VXL; ARRMA Typhon, Outcast
- Adapter
- XT90-to-TRX adapter required for TRX connectors
- In the box
- 1 x CNHL G+Plus 5000mAh 11.1V 3S Lipo Battery with XT90 Plug