This is a freestanding H-frame hydraulic shop press with a 12-ton load capacity. The body is made of 0.2 in carbon steel with a powder-coated, corrosion-resistant finish. The frame has two upright posts, a top crossbeam, and a bottle-style jack at the top.
The horizontal work table is held by pins through holes in the uprights. The working height adjusts from 1.6 to 27.8 in with the pin system, and the base has triangular reinforcements at the feet. A built-in relief valve releases pressure above 12 tons to avoid overpressure-related damage to the workbench.
Two movable stamping plates are included for securing small parts. The press is used for removing and installing automobile bushings, bearings, ball joints, U-joints, pulleys, and gears. It is also used for metalworking tasks such as bending, straightening, and stamping.
- Type
- H-frame hydraulic shop press
- Load capacity
- 12 tons
- Material
- 0.2 in carbon steel body
- Finish
- Powder-coated, corrosion-resistant
- Working height range
- 1.6 to 27.8 in
- Height adjustment
- Pin system
- Base
- Triangular reinforced base
- Frame
- Two upright posts and top crossbeam
- Jack
- Bottle-style, mounted at top
- Work table
- Horizontal, pin-held
- Included plates
- Two movable stamping plates
- Safety feature
- Built-in relief valve releases above 12 tons
- Automotive uses
- Removing and installing bushings, bearings, ball joints, U-joints, pulleys, and gears
- Metalworking uses
- Bending, straightening, and stamping
- Shipping weight
- 42,500 g (93.7 lb)