Black FridayDealsBuying guidesBrandsStoresTermsPrivacydeal.ai apps

© Deal.ai Inc.

Deal.ai
1
12V Oil Extractor and Transfer Pump

12V Oil Extractor and Transfer Pump

Last price we saw

$65.95at VXB.com Bearings, last seen Nov 3

Prices change often: ask the agent below to check today's price at every store.

Prices are checked against each store and labelled with when.

Ask our shopping agent

Enter to send, Shift+Enter for a new line

Our take on the 12V Oil Extractor and Transfer Pump

This is a 12-volt electric pump for moving oil and similar fluids out of engines, gearboxes and tanks without draining from below. It lists a 45–50 L flow rate, a 19 mm outlet and a 2.5 m power cable that reaches a car battery. The listing names kerosene and water as compatible fluids, so check your fluid before buying. No current price was provided, so there is no recent range to compare against.

Best forDIY oil changes without a drain plugTransferring kerosene to heaters or lampsPumping water from drums or tanksGarage and small-shop fluid handling
Pros
  • Runs off a 12V battery, so no mains power needed
  • 45–50 L flow rate moves fluid quickly
  • 19 mm outlet fits common hose sizes
  • 2.5 m cable gives reach from pump to battery
Cons
  • Compatibility list names only kerosene and water, not motor oil
  • No stated maximum viscosity or temperature rating
  • No self-priming or dry-run protection details given
  • Hose and clamps may not be included

12V Oil Extractor and Transfer Pump prices at every store

  • VXB.com BearingsCheck price at VXB.com Bearings

12V Oil Extractor and Transfer Pump price history

Lowest price we've seen: $65.95 on Nov 3 at VXB.com Bearings. Tracked across 1 store since Nov 3.

Specifications

Flow Rate
45-50 L
Outlet Diameter
19 mm
Cable Length
2.5 m
Fluid Compatibility
kerosene and water

Questions and answers

Can it pump used motor oil?
The listed fluids are kerosene and water. Motor oil is thicker, and the listing gives no viscosity rating, so confirm with the seller before using it on engine oil.
How fast does it empty a 5 L sump?
At the stated 45–50 L per minute, a 5 L sump would take roughly 6 to 7 seconds of pumping, plus setup time. Real flow depends on hose length and fluid thickness.
What hose fits the outlet?
The outlet is 19 mm, so use a 19 mm (about 3/4 inch) hose. Check whether hose and clamps are included before ordering.
How does it connect to power?
It has a 2.5 m cable meant for a 12V battery, such as a car battery or a 12V power supply. Keep the connection away from the fluid.
Is it self-priming?
The listing does not say. Prime the pump with fluid before starting to avoid running it dry.