This is a 150-amp, 600V aluminum service entrance cable built for mobile and manufactured homes, running power from the meter base to the main panel. It is also used as a feeder to subpanels in modular buildings, garages and light commercial units. The XLP insulation resists moisture, abrasion and chemicals, and the cable is approved for direct burial when marked USE-2 and can go in conduit, ducts or raceways in wet or dry locations. It suits anyone wiring a manufactured home service or a heavy-load subpanel who wants a single direct-burial feeder instead of separate conductors.
In stockReturn policy
Rated 4.9 out of 5 from 14 ratings, buyers are largely satisfied.
This is a 150-amp, 600V-rated aluminum service entrance cable. It carries power from a utility meter base to the main panel in a mobile or manufactured home. It is also used as a feeder to subpanels in modular buildings, large residential structures, garages, and light commercial units.
The cable has two 2/0 AWG phase conductors, one 1 AWG neutral, and one 4 AWG ground. All conductors are compact stranded 8000 series aluminum per ASTM B-800/B-801. The conductors are cabled together with XLP-insulated aluminum ground or bare copper ground and covered with reinforced binder tape. The cross-linked polyethylene (XLP) insulation resists impact, abrasion, moisture, chemicals, acids, oils, industrial solvents, and weather changes.
It is approved for direct burial when marked USE-2. It can also be installed in conduit, ducts, or raceways in wet and dry environments. At this size it typically feeds heavy-load subpanels that support HVAC systems, appliances, lighting, and general-purpose circuits.
