This is a four-conductor aluminum service entrance cable rated 600V and 200 amps, built to run power from a meter base to a mobile or manufactured home's main panel. Two 4/0 conductors carry the hot legs, one 2/0 serves as the neutral, and a 4 AWG conductor handles ground. Its XLP insulation resists moisture, abrasion and chemicals, and it is approved for direct burial when marked USE-2, or for conduit, duct and raceway runs in wet or dry locations. It suits mobile home hookups, subpanel feeds to garages, shops and modular buildings, and light commercial work where a 200-amp feeder is needed.
In stockReturn policy
Rated 4.7 out of 5 across 81 ratings, buyers generally report the cable arrives as described and works for mobile home and subpanel feeder runs.
This is a 600V aluminum mobile home feeder cable rated for 200 amps. It carries power from a utility meter base to the main distribution panel in a mobile or manufactured home. It also works as a feeder for subpanels in modular buildings, large residential units, detached garages, shops and light commercial installations.
The cable has two 4/0 AWG phase conductors, one 2/0 AWG neutral and one 4 AWG ground. All conductors are compact stranded 8000 series aluminum per ASTM B-800/B-801. The conductors have cross-linked polyethylene (XLP) insulation and are cabled together with reinforced binder tape. The insulation resists impact, abrasion, moisture, chemicals, acids, oils, industrial solvents and weather changes.
The cable is approved for direct burial when marked USE-2. It can also be installed in conduit, ducts or raceways in wet or dry locations. It is sunlight resistant.
