This is a quadruplex aluminum URD (underground residential distribution) cable rated for 600 volts. It has four 2/0 AWG conductors cabled together. The conductors carry surface printing for identification, and the neutral conductor has a yellow stripe.
It is designed for secondary power distribution circuits, installed either in duct or by direct burial. It can be used in wet and dry locations at a maximum operating temperature of 90°C. The cable can also be supplied pre-pulled into duct.
The conductors are 1350-H19 series aluminum, in either concentric strand or compressed form. The insulation is black cross-linked polyethylene (XLP). It is water tight and resists corrosive substances, oil, heat and flame. The cross-linking gives it the strength needed for harsh conditions such as direct burial.
- Conductor
- 1350-H19 series aluminum, concentric strand or compressed
- Phase size
- 2/0 AWG, 19 strands
- Neutral size
- 2/0 AWG, 19 strands
- Configuration
- Quadruplex, 4 conductors cabled together
- Insulation
- Black cross-linked polyethylene (XLP)
- Insulation thickness
- 0.080 inches
- Outside diameter
- 1.34 inches
- Weight
- 0.745 lbs per ft
- Voltage rating
- 600 V
- Max temperature
- 90°C, wet and dry locations
- Installation
- Direct burial or in duct
- Identification
- Surface printing; yellow stripe on neutral
- Standards
- ASTM B-230, B-231, B-609, B-901; ICEA S-105-692; Federal Specification J-C-30B; RUS accepted