Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a replacement loop of Oregon's 21LPX PowerCut chain for .325-inch pitch saws: .058 gauge, 80 drive links, sized for 20-inch bars with a 1.5 mm groove. It uses full-chisel cutters for fast cross-cutting and offset depth gauges that keep cuts from wandering into the sidewall. Blued cutters resist corrosion and top-plate filing indicators make hand sharpening easier. It suits experienced woodcutters on 38 to 62 cc saws; full chisel is aggressive and less forgiving in dirty wood than semi-chisel chains.
In stockReturn policy
Owners of .325-pitch saws rate the 21LPX as a fast, durable cutting chain that holds an edge well in clean wood. Most praise its speed and oiling, while some note it dulls quickly in dirty conditions and must be sharpened often.
This Oregon 21LPX080 G PowerCut is a full chisel saw chain with a .325 pitch, .058 gauge and 80 drive links. It is a replacement loop for chainsaw bars with a 20-inch cutting length and a 1.5mm groove. The round ground full-chisel cutters give fast, precise cuts, and the chain runs with low vibration.
Offset depth gauges keep the cutters from driving into the sidewall for smoother cuts. LubriTec technology keeps the chain and guide bar oiled to reduce friction and wear. The blued cutters protect against corrosion, and top-plate filing indicators help with sharpening. The chain is made from OCS-01 steel and suits saws from 38 to 62 cc.
To check the fit, look for a 21, 31, K2 or 58J stamped on a drive link. The current chain or bar should also read 325 058 80 DL. This professional saw chain may be capable of kickback that could cause serious injury. Use it only with experience and specialized training for dealing with kickback.
