Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Oregon 80TXL064G is a 64-drive-link SpeedCut Nano loop chain in .325 low-profile pitch and .043 gauge, built for battery and small gas saws up to 38cc. Its micro-chisel cutters and narrow chassis are tuned for the 1–3 HP range, which Oregon says cuts faster, drains the battery less and stalls less than standard chain on the same saw. It only works with an Oregon SpeedCut Nano bar and sprocket, so it is not a drop-in replacement for a standard .325 setup. Owners of small top-handle and battery saws are the target; anyone with a conventional bar should look at a standard .325 or 3/8 low-profile chain instead.
In stockReturn policy
It is made for battery and low-powered gas saws up to 38cc. Its chain chassis is designed for saws in the 1-3 HP range, where it increases cutting speed, extends battery runtime and reduces the tendency to stall.
The chain works with the SpeedCut Nano guide bar and sprocket as one cutting system. Reshaped micro-chisel cutters give a precise cut and a good surface finish. Blued cutters protect against corrosion. Expanded top-plate filing indicators and depth gauge filing indicators make accurate sharpening easier.
It must be used with an Oregon SpeedCut Nano guide bar and sprocket. It is not compatible with standard .325" pitch cutting systems.
