This is a 48V 1000W electric bicycle conversion kit built around a 26-inch rear wheel with a brushless hub motor. It comes as a complete wheel with tire and fits any 26" bicycle frame with 5 5/16" rear dropout spacing. The wheel's frame is aluminum alloy and supports up to 220 lbs. Top speed is 45 km/h.
The dual mode controller lets the motor run with or without Hall effect sensing. If a Hall component inside the motor fails, the controller switches to non-Hall mode and the motor keeps working. A pedal assist system lets you pedal while the motor helps, and a twist throttle is included. The LCD display shows battery power, time, speed, mileage and gears. The brake levers cut off power when you brake. The kit is CE certificated.
The kit only suits conventional bicycles, not tricycles or tractors. Installation at a licensed repair shop is advised. Use in rain is not recommended, and riders should wear a helmet. A battery and charger are not included. A 48V battery of at least 17Ah (Li, lead-acid, NiMH or similar) is compatible.
- Voltage
- 48V
- Controller power
- 1000W
- Motor speed
- 600 RPM
- Motor torque
- 60 N.m
- Max speed
- 45 km/h
- Wheel size
- 26 in rear wheel; compatible tire size 26 in
- Dimensions
- 25 3/16" diameter x 2" wide
- Net weight
- 24.3 lbs
- Max load
- 220 lbs
- Frame material
- Aluminum alloy
- Rear dropout
- 5 5/16"
- Flywheel