Prices differ by screen size, and this one may be for a smaller size: check the size at the store.
Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a Waveshare 3.5-inch IPS touchscreen for the Raspberry Pi, wired over SPI and connected through pogo pins that press onto the GPIO header from underneath the board. Because the header stays free, most HATs and coolers still fit, which is the main thing that sets it apart from stacked 3.5-inch screens. The panel is 320x480 with 170-degree viewing angles, 262K colors and 5-point capacitive touch behind toughened glass. It is aimed at Pi 5, Pi 4 and Zero owners building compact dashboards, control panels or handheld projects, and a 13-pin rear connector plus cable lets it work with other boards.
In stockShips from the UK · priced in GBP (£17.00) · duties may applyReturn policy
This is a 3.5" IPS touch display for Raspberry Pi projects. It has a resolution of 320x480, 262K colors and 170° viewing angles. The display refreshes at 60Hz and is controlled over SPI.
The display connects to the Raspberry Pi's GPIO pins with pogo pins from the underside of the board. This leaves the GPIO header free, so most HATs and coolers can still be used. It is designed mainly for mounting on a Raspberry Pi 5, 4 or Zero.
The touch panel is toughened glass with 5-point capacitive touch and a fast response. A 13-pin connector on the rear and the included assembly cable let you use the display with other development boards. The manufacturer's wiki provides setup options for Raspberry Pi and ESP32-S3. Other boards and platforms may work, but they need your own code. The PCB has an immersion gold finish.
