This is a three-compartment chicken nesting box made of galvanized steel. The three open-front compartments are separated by two dividers, with a flat lid across the top and a rail across the bottom front. The box hangs at a height of 18 to 20 in from the ground.
The steel body is non-foldable and does not rust or wear out over time. Clusters of oval ventilation holes in the side panels increase airflow through the compartments. Keyhole-shaped hanging holes let you hang the box and take it down again, and several nesting boxes can be connected to one another.
The chassis is slightly tilted so eggs roll forward underneath the lid and stay there until you collect them. Padding placed under the lid helps cushion the eggs against collisions. The box can be washed out with a high-pressure water gun, and assembly uses screws and nuts.
- Material
- Galvanized steel
- Compartments
- 3
- Assembled dimensions
- 32.90 x 16.34 x 15.35 in (83.6 x 41.5 x 39 cm)
- Weight
- 16.00 lb (7.26 kg)
- Mounting height
- 18-20 in from the ground
- Mounting
- Keyhole-shaped hanging holes
- Ventilation
- Ventilation holes in the side panels
- Egg collection
- Slightly tilted chassis rolls eggs forward under the lid
- Connectable
- Can be connected to other nesting boxes
- Cleaning
- Can be washed with a high-pressure water gun
- Package dimensions
- 33.07 x 15.75 x 6.30 in (84 x 40 x 16 cm)
- Package weight
- 17.60 lb (7.98 kg)
- In the box
- Screws, nuts, and assembly instructions
- Customization
- Available