Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A one-wheel-end service kit for most 3,500 lb trailer axles with the common 1-3/8" × 1-1/16" stepped spindle. It bundles the inner and outer bearings, the seal and a drive-in dust cap with a removable rubber plug, so you can repack or replace a hub or hub/drum in one job. It suits utility, cargo, boat and enclosed trailer owners doing their own maintenance. Against buying parts loose, the value is that the bearing and seal sizes are matched to the axle, though you still need your own grease and tools.
In stockReturn policy
This kit contains the parts needed to service one wheel end on a trailer axle. It is made for most 3,500 lb trailer axles that use the common 1-3/8" × 1-1/16" stepped spindle. It suits hub or hub/drum maintenance on utility, cargo, boat, and enclosed trailers.
The kit includes an inner bearing, an outer bearing, a grease seal, and a drive-in dust cap with a removable rubber plug. It is EZ-Lube compatible and also works on standard spindles. It fits many standard 3,500 lb axle hubs and hub/drums.
Bearing and seal numbers should be checked against the existing components before installation, since some manufacturers use alternate combinations. The kit is commonly used on Dexter, Lippert, Rockwell, and many other standard 3,500 lb axle configurations.
