Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A complete 4-axis motion kit: four Nema 23 bipolar steppers rated 425 oz.in with dual shafts, four DM542A microstepping drivers, two 36V 350W power supplies and a breakout board. The DM542A drivers accept 18–50VDC and up to 4.0A per phase, with up to 128 microsteps, and are built for 2-phase motors from 42mm to 86mm frame size. It suits CNC router, mill and plasma builders who want matched electronics in one box rather than sourcing parts separately. Against buying parts piecemeal, the kit saves matching work but locks you into its driver and supply choices.
In stockShips from China · duties may applyReturn policy
Owners of this class of kit generally report the motors and DM542A drivers run smoothly and quietly at low speeds, with good torque for their size. Complaints center on wiring documentation and on power supply sizing when all four axes run hard.
This kit is a 4-axis CNC control set built around Nema 23 stepper motors. It includes 4 bipolar Nema 23 motors rated at 425 oz.in, 4 DM542A stepper drivers, 2 power supplies and a breakout board.
The DM542A is a two-phase hybrid stepper driver. It works with 2-phase hybrid stepper motors of 42 mm to 86 mm outside diameter and phase current under 4.0 A. It uses average current control with a 2-phase sinusoidal output current drive, which lets the motor run smoothly with little noise and vibration. It is used in mid-size and large numerical control equipment such as CNC machines, engraving machines, computer embroidery machines and packing machines.
The breakout board has a built-in DB25 male connector. Pins can be assigned to the X, Y, Z, A, B and C axes, or to spindle control and enable signals. It is powered by +5V DC and uses surface-mount construction with built-in C-class optocouplers.
