Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Twotrees 17HS4401 is a standard NEMA 17 hybrid stepper: 1.8 degree step angle, 2 phases, 1.5 A per phase, and about 65 oz.in of holding torque. It runs on 12-24 V and comes with 4-lead DuPont cabling, so it drops into most 3D printers, CNC routers and laser rigs that take a 42 mm frame motor. It is a plain workhorse rather than a high-torque or silent-spec motor, so it suits builders replacing a stock extruder or axis motor and anyone assembling a kit on a budget. Compared with premium NEMA 17s, it gives up torque headroom and quiet running, but it matches the common 17HS4401 spec that many printer designs are built around.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
This is a pack of five Twotrees 17HS4401 NEMA 17 stepper motors (also marked 42BYGH). Each is a 4-lead, 2-phase hybrid motor with a 1.8° step angle and a rated current of 1.5 A per phase. DuPont lines are included for connecting them to 3D printers and CNC machines.
The motor has a reinforced PCB inside and a stator built so the teeth are ground evenly and cleanly. The rotor surface is coated with epoxy resin that seals the rotor and is cured at high temperature. After the rotor is machined, metal residue such as iron pins is not likely to collect in the tooth grooves.
The motor turns at a steady speed with low noise and without losing steps. It is suited to printer designs such as Kossel, Prusa I3, Ultimaker and CoreXY.
