
4" DSI Round Touch Display for Raspberry Pi
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A 4-inch round IPS touchscreen made for Raspberry Pi boards, driven over the DSI ribbon connector rather than HDMI. Its 720 x 720 square-pixel panel gives a true circular image, with 10-point capacitive touch, a 170-degree viewing angle and optical bonding that cuts reflections. It suits makers building round-faced projects: smart home control panels, media dials, gauges and kiosk displays. Against generic HDMI round displays, it wins on cable count and clean integration but ties you to a Pi with a free DSI port and to the vendor's driver setup.
In stockShips from the UK · priced in GBP (£70.58) · duties may applyReturn policy
This is a 4-inch round IPS touch display for the Raspberry Pi, with a hardware resolution of 720 x 720 and a 170° viewing angle.
The screen uses 10-point capacitive touch on a toughened glass panel with up to 6H hardness. Optical bonding reduces the air gap between the display and the touch panel, which cuts reflections and keeps the image clear.
The LCD is driven directly through the Raspberry Pi's DSI interface at a refresh rate of up to 60 Hz. Backlight brightness can be controlled in software, and a Raspberry Pi OS driver is provided for use with the Pi. It supports the Pi 4B, 3B+ and 3A+, while the CM3+ and CM4 need an additional 15 cm DSI cable. The Raspberry Pi itself is not included.