
5 Set Hex Chicago Screws, Metric Hex Drive Socket Cap 8 x 90 mm Bolts and 8 x 18 mm Nuts Binding Screw Posts, Black
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A five-set pack of black hex-drive Chicago screws: M8 bolts with 90 mm posts and matching hex socket nuts. The 56.5 mm thread length and 16 mm cap make them a fit for binding thick stacks of leather, board or album pages, and the 45# carbon steel with a 4.8 strength level is adequate for furniture and craft joins that are not highly loaded. They are a step up in holding power from small slotted binding posts, but the hex socket needs an 18 mm socket or driver, and the fixed 90 mm length limits them to thick assemblies. Buyers choosing between these and standard Chicago screws should weigh the larger 10 mm hole requirement and the single length on offer.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
This is a set of five binding screw posts, each made up of a hex-drive socket cap bolt and a matching nut. The bolts and nuts are black and made of 45# carbon steel.
The hex socket heads have clear threads and are made to resist slipping, so they tighten and come apart easily. The carbon steel is wear-resistant and corrosion-resistant, with high hardness and good toughness.
To install, pre-drill holes in the two objects being joined, insert the bolt and nut, and tighten with a screwdriver. The locked objects must be thinner than the combined length of the screw and nut rod, or the post will not tighten.







