What can an 8-inch table saw cut that a 10-inch cannot?

It cuts the same kinds of material but with less depth. Expect it to handle dimensional lumber, trim and plywood up to roughly 2 inches thick; thicker or denser stock is better left to a 10-inch saw.

Is the 6.7-amp motor enough for hardwood?

It is fine for softwood, plywood and light hardwood with a sharp 24-tooth blade and a slow feed. Dense hardwood and thick stock will bog it down, so take shallow passes.

Does it come with a stand?

No stand is listed. The saw is described as compact and portable, so plan to set it on a bench or build a simple stand for jobsite use.

Can I use a different blade?

It ships with a 24-tooth blade, which is a ripping-style blade. A finer-tooth 8-inch blade gives cleaner crosscuts and trim work; check the arbor size before buying a replacement.

How accurate is the miter gauge?

The sliding miter gauge and scale markings are meant for angled cuts, but on saws in this class the gauge usually needs checking against a square before critical cuts.

DIYers, hobby woodworkers and contractors doing trim or small furniture who need a saw they can carry and store. Anyone cutting thick hardwood or full sheets regularly should look at a 10-inch contractor saw.

Where is the 8-Inch Jobsite Table Saw cheapest?

At Walmart, for $97.19, as of our latest check.

Towallmark

8-Inch Jobsite Table Saw

Best price now

$97.19at WalmartChecked Nov 9

Prices are checked against each store and labelled with when.

Visit Walmart

Towallmark

8-Inch Jobsite Table Saw

Best price now

$97.19at WalmartChecked Nov 9

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $97.19 at Walmart on Nov 9.

Our take on the 8-Inch Jobsite Table Saw

The Towallmark 8-Inch Table Saw is a compact bench-top saw built around a 6.7-amp copper motor that spins its 24-tooth blade at up to 3,576 RPM. It pairs that motor with a sliding miter gauge and clear scale markings for angled and repeat cuts, and its small footprint is meant to move between a jobsite and a shop. Against 10-inch contractor saws it gives up blade capacity and rip width in exchange for lighter weight and easier storage, so it fits trim work and light furniture builds better than heavy stock. It is a budget-class tool, and owners of saws in this class typically note that the fence and table need checking and tuning before cuts come out square.

Best forDIYers and hobby woodworkersTrim and small furniture workJobsite use where the saw must be carried inShops with limited space

Pros

6.7-amp motor reaches 3,576 RPM for clean cuts in softwood and plywood
24-tooth blade and sliding miter gauge handle angled cuts
Compact, light build is easy to move and store
Clear scale markings simplify depth and angle setup
Simple controls suit first-time table saw users

Cons

8-inch blade limits cut depth and rip capacity versus 10-inch saws
No stand or outfeed support mentioned, so large panels need help
Fence and table alignment often need tuning out of the box on saws in this class
6.7 amps is modest for dense hardwood and thick stock

8-Inch Jobsite Table Saw prices at every store

WalmartNew
In stockSold by ErikamaReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$97.19+ $15.00 shippingChecked Nov 9
Visit Walmart

About the 8-Inch Jobsite Table Saw

This is an 8-inch jobsite table saw for woodworking, furniture making and general carpentry. It runs on a 6.7-amp copper motor with a cutting speed of up to 3576 RPM. The compact build is made for easy transport, setup and storage on a jobsite or in a workshop with limited space.

The saw has a 24-tooth blade and a sliding miter gauge for angled cuts. The controls and scale markings are laid out to make adjustments simple.

Blade size: 8 inches
Blade teeth: 24-tooth
Motor: 6.7 Amp, copper
Speed: Up to 3576 RPM
Miter gauge: Sliding
Color: Gray
Model size: H-8

Specifications

color: GraySource
actual_color: GraySource
size: H-8Source

Questions and answers

What can an 8-inch table saw cut that a 10-inch cannot?: It cuts the same kinds of material but with less depth. Expect it to handle dimensional lumber, trim and plywood up to roughly 2 inches thick; thicker or denser stock is better left to a 10-inch saw.
Is the 6.7-amp motor enough for hardwood?: It is fine for softwood, plywood and light hardwood with a sharp 24-tooth blade and a slow feed. Dense hardwood and thick stock will bog it down, so take shallow passes.
Does it come with a stand?: No stand is listed. The saw is described as compact and portable, so plan to set it on a bench or build a simple stand for jobsite use.
Can I use a different blade?: It ships with a 24-tooth blade, which is a ripping-style blade. A finer-tooth 8-inch blade gives cleaner crosscuts and trim work; check the arbor size before buying a replacement.
How accurate is the miter gauge?: The sliding miter gauge and scale markings are meant for angled cuts, but on saws in this class the gauge usually needs checking against a square before critical cuts.
Who is this saw for?: DIYers, hobby woodworkers and contractors doing trim or small furniture who need a saw they can carry and store. Anyone cutting thick hardwood or full sheets regularly should look at a 10-inch contractor saw.
Where is the 8-Inch Jobsite Table Saw cheapest?: At Walmart, for $97.19, as of our latest check.