Price facts
- Last seen at $30.00 at AC-DC PowerShack on Nov 19.
The APS-415 is a small regulated switching bench supply with an adjustable 3–15V DC output and a 4A continuous current limit. It runs on 117V AC and feeds loads through front binding posts that take 4mm banana plugs, spade lugs or bare wire. Voltage is set with a dial and read on an analog meter, so you need a multimeter to confirm the output before connecting a 12V or 13.8V device. It suits hobbyists and bench work on LEDs, fans and low-voltage circuits, but it is a single fixed-range supply with no current limit dial, unlike lab supplies that offer independent voltage and current control and digital readouts.
In stockReturn policy
Rated 4 out of 5 from 26 ratings, the supply is generally seen as a simple, working bench unit for low-voltage jobs. The main reservations are the analog meter and the limited range.
The APS-415 is a black, adjustable regulated switching DC bench power supply for low-voltage testing and electronics workbench use. Its output voltage adjusts from 3V to 15V DC, with a maximum continuous output current of 4A.
The front panel has binding posts that accept 4mm banana plugs, spade lugs or bare wire. Output is set and read from an analog meter on the unit. The chassis measures 6.5 × 4.5 × 3.5 in (H × W × L) and weighs 3.5 lb.
It runs on 117V AC, 60Hz input and provides regulated DC output only, with no AC output. Before connecting a load, check that the device requires DC voltage, draws 4A or less continuous current and matches the output wiring polarity; for 12V or 13.8V projects, set and verify the voltage with a multimeter at the terminals first.
It checks today's price at every store, compares the alternatives and answers in about a minute.




