
AEM Induction 21-678C - AEM 08-14 Mitsubishi Lancer Evolution X 2.0L Cold Air Intake
Best price now
Compared across 10 stores. Prices are checked against each store and labelled with when.

Compared across 10 stores. Prices are checked against each store and labelled with when.
The AEM 21-678C is a cold air intake kit for the 2008-2015 Mitsubishi Lancer Evolution X with the 2.0L turbo four. It replaces the factory air box and intake tubing with an aluminum pipe in gunmetal gray powder coat and an oversized AEM Dryflow synthetic filter, and AEM rates it at 17 hp and 17 ft-lb at 4100 rpm on its dyno. The filter sits in the stock air box location inside a replacement box that shields it from engine heat, and the kit keeps the factory mass air flow sensor, bypass valve and vacuum line connections. It suits Evo X owners who want a bolt-on intake that needs no oiling and holds a CARB exemption, rather than a full tune or a short-ram setup.
In stockReturn policy
In stockReturn policy
In stockReturn policy
In stockReturn policy
In stockReturn policy
In stockReturn policy
In stockReturn policy
In stockReturn policy
In stockReturn policy
In stockReturn policy
Also available at
Evo X owners generally rate the AEM 21-678C well for fit, sound and a modest but real power bump. Most say the install is straightforward and the dry filter is easier to live with than oiled types. Some note the gains are subtle in daily driving and the intake is louder under load.
This cold air intake is designed for the 2008-2014 Mitsubishi Lancer Evolution X 2.0L, including Evolution, MR and GSR models. It replaces the factory air filter, intake tubing and air box. It was designed, tuned and dyno-tested to increase horsepower and torque and to improve acceleration and engine sound.
Air enters through an oversized AEM Dryflow filter made of oil-free, washable, reusable synthetic media. The filter sits in the original air box space and is protected by a replacement air box designed to reduce intake air temperature. The intake tubing is aluminum with a gunmetal gray powder-coated finish.
The system works with the factory emissions control devices, including the mass air flow sensor, air bypass valve and engine vacuum lines. It comes with a replacement rubber inlet hose. Some AEM intakes are not legal for sale or use in California and other states that follow California emission standards, so check the vehicle applications for this kit's legal status. The intake is backed by AEM's Lifetime Limited Warranty.
It checks today's price at every store, compares the alternatives and answers in about a minute.






