Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
AMBROSIA PLA is a 1.75mm filament wound on a 130g cardboard spool, sold in 1kg lots and built to a tight ±0.03mm diameter tolerance. It is made from virgin Grade-A pellets with no additives, and the refill core matches Bambu refill geometry so it drops into AMS setups. PLA is the easiest material for most hobbyists: low melting point, little odor and no heated bed needed. Against typical budget PLA, the tighter tolerance and cardboard spool are the main draws; the trade-off is that cardboard spools can drag or shed in some feeders.
In stockReturn policy
Rated 4.9 out of 5 across 86 ratings, buyers are largely very positive. They highlight smooth, consistent printing and the AMS-friendly cardboard spool.
AMBROSIA PLA is a 1.75 mm PLA filament for 3D printing, part of the brand's Low Calorie line, which has no additives. It is made from 100% virgin, Grade-A, non-toxic pellets. The diameter tolerance is tighter than standard, at +/- 0.03 mm, for consistent extrusion throughout the spool.
The filament is wound on a cardboard spool. It is vacuum sealed with a desiccant bag and arrives in a cardboard box.
PLA is a biodegradable plastic made from renewable resources such as corn. It has a relatively low melting point and can be printed without a heated bed. Printing with PLA is typically odorless, or gives off a faint sweet aroma, and it emits fewer harmful fumes than some other 3D printing materials. The glue holding the spool together is rated for 70°C (158°F). For a filament dryer or any environment hotter than that, a printed spool clip is recommended.
